Random AW11 Bits I don't want Lying around anymore

Re: Random AW11 Bits I don't want Lying around anymore (Knightrous)

Mon, 09 Dec 2013 17:26:42 GMT

Cheers mate, will bring cash :)

Re: Random AW11 Bits I don't want Lying around anymore (wiso)

Mon, 09 Dec 2013 16:56:38 GMT

yeah no problem man, I should be out at the MTC so I can bring them out.

Re: Random AW11 Bits I don't want Lying around anymore (Knightrous)

Mon, 09 Dec 2013 12:47:47 GMT

I'll take the Silvertop headers and the blacktop pistons.
Don't mind if I collect them in January when down for the MR2 Challenge?

Re: Random AW11 Bits I don't want Lying around anymore (wiso)

Mon, 09 Dec 2013 12:19:56 GMT

Added some new parts to the first post

Re: Random AW11 Bits I don't want Lying around anymore (wiso)

Wed, 20 Nov 2013 11:05:52 GMT

Sure mate, still got them, PM Sent

Re: Random AW11 Bits I don't want Lying around anymore (itb-16v)

Wed, 20 Nov 2013 08:05:33 GMT

I'll take the drive shafts if you still have them

Random AW11 Bits I don't want Lying around anymore (wiso)

Sun, 10 Nov 2013 12:49:43 GMT

Hi Guys,

I have some randoms bits and peices I no longer need as spare, most likely because I have more than 1 of them and don't need 2 spares.

All this can be pickup from South West Sydney, or I can post it at your expense.

87 RH Drivers side Headlight, complete $50

Manual C5* driveshafts. Didn't make noise when on the car. One of the boots is getting some stress fractures. the rest all good. $50. *driveshafts are called for, just waiting pickup*

4age headgasket that came with a kit i bought, the thing is 1.8mm thick. standard is 1.2mm so would be good for someone who wants to turbo a 4age on a budget or upping boost on their 4agze. $20

I picked up a whole load of blue interior parts to keep for myself as spare so i don't want to hold onto the spare black interior I have now. Got a whole heap of random bits here, if you see anything in the photo you want, just ask

I picked up some very nice brakes so don't need these anymore, they definitely need a rebuild. So make an offer ~$20. I will be removing the hoses and keeping these.

I have a set of Silvertop headers I was going to use , but with the NA they didn't work well, would be better with an SC I have the heat shield and lower mounting bracket. you can get the mid pipe adapter from SV3 power. $40

I have a spare crankshaft i don't really need anymore, It needs a grind as some material went between it and the bearing. It spins freely in a couple of blocks I have here so it appears to be straight. 42mm journal $80

I Have standard late model Bigport Rods and pistons, $40 I also have a set of 4 blacktop slugs with pins in good condition. $20 or buy them together for $50

As I finalise my build I have more stuff that I will put up.

Thanks