Wheel stud & spacer dimensions, need help.

Re: Wheel stud & spacer dimensions, need help. (rogerlam)

Wed, 23 Oct 2013 14:00:42 GMT

Carmikey
rogerlam
Carmikey
^^just make sure the Centre bore (CB) is 60.1mm. That is the original size.

yep, ive bought some 60.1 - 66.1 hubcentric rings to make sure that the wheels will fit perfectly

Where did you get the 60.1 - 66.1 hubcentric rings from? I too may purchase another set, may do it the same way as you.. Looks to be the cheaper way out. Did you buy from GKTECK?

i bought my extended wheel studs and spacers from gktech and the hubcentric rings off eBay.
you could use the ones that mister2 bought or these are the ones I bought.
http://www.ebay.com.au/itm/281191735978?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

Re: Wheel stud & spacer dimensions, need help. (mister2)

Wed, 23 Oct 2013 10:01:29 GMT

I just bought a couple of sets of aluminium hub rings in that size from this eBay seller a few weeks ago. Good quality and excellent price!

http://www.ebay.com.au/it...mp;hash=item4d13cc6340

Re: Wheel stud & spacer dimensions, need help. (Carmikey)

Wed, 23 Oct 2013 09:12:19 GMT

rogerlam
Carmikey
^^just make sure the Centre bore (CB) is 60.1mm. That is the original size.

yep, ive bought some 60.1 - 66.1 hubcentric rings to make sure that the wheels will fit perfectly

Where did you get the 60.1 - 66.1 hubcentric rings from? I too may purchase another set, may do it the same way as you.. Looks to be the cheaper way out. Did you buy from GKTECK?

Re: Wheel stud & spacer dimensions, need help. (rogerlam)

Tue, 22 Oct 2013 16:40:44 GMT

Carmikey
^^just make sure the Centre bore (CB) is 60.1mm. That is the original size.

yep, ive bought some 60.1 - 66.1 hubcentric rings to make sure that the wheels will fit perfectly

Re: Wheel stud & spacer dimensions, need help. (Carmikey)

Tue, 22 Oct 2013 16:21:37 GMT

^^just make sure the Centre bore (CB) is 60.1mm. That is the original size.

Re: Wheel stud & spacer dimensions, need help. (rogerlam)

Mon, 21 Oct 2013 22:41:42 GMT

robk
14.3mm knurl will be fine.

Awesome, just ordered everything and can't wait to put it all on :D

Re: Wheel stud & spacer dimensions, need help. (robk)

Mon, 21 Oct 2013 22:14:53 GMT

14.3mm knurl will be fine.

Re: Wheel stud & spacer dimensions, need help. (rogerlam)

Mon, 21 Oct 2013 21:32:15 GMT

robk
FYI, off the top of my head, the standard SW20 wheel studs are all M12x1.5, 40mm long, with 14.2mm knurl diameter. I'll double check that later, but I think it's correct.

Oh ok, will 0.1mm in the knurl make a difference?
There's some extended studs for nissan from gktech that are 14.3mm and M12X1.25.
I'm assuming that the thread pitch won't matter as long as I use the correct lug nuts.

Re: Wheel stud & spacer dimensions, need help. (robk)

Mon, 21 Oct 2013 21:22:07 GMT

FYI, off the top of my head, the standard SW20 wheel studs are all M12x1.5, 40mm long, with 14.2mm knurl diameter. I'll double check that later, but I think it's correct.

Re: Wheel stud & spacer dimensions, need help. (rogerlam)

Mon, 21 Oct 2013 20:51:09 GMT

Carmikey
Hi Mate,
depending on what size you want to extend out to, these are great.
http://www.ebay.com.au/itm/OEM-HUB-CENTRIC-10MM-WHEEL-SPACER-ADAPTERS-5X114-3-60-1MM-CB-12X1-5-EXTEND-STUDS-/181078685796?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a29217864&_uhb=1

I purchase a set of these, only wanted 10mm but they stock right out to about 30mm. There are also hub centric, not just wheel spacers.

Awesome, exactly what I was looking for. I'm currently running some OEM Nissan BBS mesh wheels with +40 offset so I might need some hub centric rings but other then that I think that might be the one to go with.

By any chance, do you know how long the studs are and wht the spline/knurl diameter is? Can't seem to find them on the ebay ad

Re: Wheel stud & spacer dimensions, need help. (Peter)

Mon, 21 Oct 2013 20:29:21 GMT

Hi Rogerlam,
There has been previous discussion on this forum about Land Cruiser studs being the same as SW20 studs but a little longer. Like about 5 mm.
Others may have more detailed knowledge.

Re: Wheel stud & spacer dimensions, need help. (Carmikey)

Mon, 21 Oct 2013 20:25:56 GMT

Hi Mate,
depending on what size you want to extend out to, these are great.
http://www.ebay.com.au/itm/OEM-HUB-CENTRIC-10MM-WHEEL-SPACER-ADAPTERS-5X114-3-60-1MM-CB-12X1-5-EXTEND-STUDS-/181078685796?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a29217864&_uhb=1

I purchase a set of these, only wanted 10mm but they stock right out to about 30mm. There are also hub centric, not just wheel spacers.

Wheel stud & spacer dimensions, need help. (rogerlam)

Mon, 21 Oct 2013 18:42:09 GMT

Hey guys,
So I recently bought some new rims cause my old ones got bent and the new wheels are sitting a bit too close to my coils.

I'm deciding to get some extended studs and run some spacers and just need some info on the stud dimensions like the knurl/spline, hub size, etc of an 1990 SW20

Any recommendations would help, thanks :)