Getting desperate!! Need Parts 1990 Sw20 Import

Re: Getting desperate!! Need Parts 1990 Sw20 Import (Road and Track)

Sun, 06 Oct 2013 21:17:41 GMT

didnt i sent you a toe arm??

i have front struts with new inserts fitted. direct email if interested

Re: Getting desperate!! Need Parts 1990 Sw20 Import (darius)

Fri, 04 Oct 2013 15:59:24 GMT

I've located the 2 rear toe arms, but as 5SGTE has said they are shorter.
Did you want to measure yours and let me know.
They are also not light. shipping to QLD might be a bit.

Re: Getting desperate!! Need Parts 1990 Sw20 Import (Pipinhot)

Thu, 03 Oct 2013 22:07:48 GMT

My other question is did they ever change the mounting system for the front struts on sw20's?
or they always the same?

As a last resort do you reckon these will be worth the money or even fit?
http://www.ebay.com.au/itm/KONI-YELLOW-SPORT-SHOCK-STRUT-TOYOTA-MR-2-SW20-90-96-/280644989932?pt=Motors_Car_Truck_Parts_Accessories&hash=item4157beb3ec&_uhb=1

Re: Getting desperate!! Need Parts 1990 Sw20 Import (Carmikey)

Thu, 03 Oct 2013 11:40:14 GMT

IMO - I would try source a second hand set of ADM struts (there are not the sealed type). If shocks are no good, can simply install new shock inserts. There are quite a few different brands available, then effectively you have new struts.

Re: Getting desperate!! Need Parts 1990 Sw20 Import (Pipinhot)

Thu, 03 Oct 2013 11:17:09 GMT

I need two front complete struts as they are sealed. My rear right is open but rear left is sealed previous owner did botch job :)

so imo a kit would be my best option.
but where :(

Re: Getting desperate!! Need Parts 1990 Sw20 Import (Carmikey)

Thu, 03 Oct 2013 09:43:42 GMT

Pipinhot
Well i purchased the shocks went to bed, woke up, notification that my purchase was refunded....turned out the shocks were recalled.

Anyone else sell shock/strut kits?

Ah... that sucks mate. As you state, you have an import sdub, in that case it should have sealed struts/shocks, meaning they would more likely be 'Bilstein' which are seam welded (hence you cannot install new shocker inserts).
Do you require just shocker inserts or complete struts?
You can easily tell - just look for a large flange nut where shocker rod goes into strut body. Will be either a Nut or seam welded.

Re: Getting desperate!! Need Parts 1990 Sw20 Import (Pipinhot)

Thu, 03 Oct 2013 09:24:16 GMT

Well i purchased the shocks went to bed, woke up, notification that my purchase was refunded....turned out the shocks were recalled.

Anyone else sell shock/strut kits?

Re: Getting desperate!! Need Parts 1990 Sw20 Import (5SGTE)

Wed, 02 Oct 2013 19:24:54 GMT

Pretty sure a gen3 arm is shorter?

Re: Getting desperate!! Need Parts 1990 Sw20 Import (Pipinhot)

Wed, 02 Oct 2013 16:51:50 GMT

Carmikey
If you want to save some $$$, could go for these. I have these fitted to one of my Mr2, great produce with low price.
http://www.ebay.com.au/itm/MONROE-SENSA-TRAC-SHOCKS-FOR-90-95-TOYOTA-MR2-FULL-SET-/360483834866?pt=Motors_Car_Truck_Parts_Accessories&hash=item53ee82cbf2&_uhb=1

They look extremely tempting.

Do they allow adjustment for 30mm lowered springs?

Re: Getting desperate!! Need Parts 1990 Sw20 Import (darius)

Wed, 02 Oct 2013 15:55:14 GMT

I think i might have that part off my GEN3 half cut
let me look tonight.

Re: Getting desperate!! Need Parts 1990 Sw20 Import (Carmikey)

Wed, 02 Oct 2013 13:44:00 GMT

If you want to save some $$$, could go for these. I have these fitted to one of my Mr2, great produce with low price.
http://www.ebay.com.au/itm/MONROE-SENSA-TRAC-SHOCKS-FOR-90-95-TOYOTA-MR2-FULL-SET-/360483834866?pt=Motors_Car_Truck_Parts_Accessories&hash=item53ee82cbf2&_uhb=1

Getting desperate!! Need Parts 1990 Sw20 Import (Pipinhot)

Wed, 02 Oct 2013 13:29:40 GMT

Car is in at peddars and they have tried every possible path to get me some shocks, unfortunately they have come back with nothing.

I am after a Rear RH toe Arm that looks like this (Not bent...)

I have the shocks/inserts for the rear of the car but the rear left has been sealed so i need a new Strut/housing for it that is not sealed.

And finally, i need two front shocks and struts, in working order.

If this is to hard to chase after should i just get this kit here, and will they fit?
http://www.ebay.com.au/itm/KONI-YELLOW-SPORT-SHOCK-STRUT-TOYOTA-MR-2-SW20-90-96/280644989932?_trksid=p2045573.m2042&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D27%26meid%3D1689488770077097152%26pid%3D100033%26prg%3D1011%26rk%3D4%26rkt%3D4%26sd%3D330949299843%26