https://www.classic-ford.org/mr2/mr2play/tt.aspx?forumid=98(c) MR2 AUSTRALIA30I need left and right front suspension assemblies with springs. My preference is for Bilstein shocks with extra-low springs.ThanksPan..https://www.classic-ford.org/mr2/mr2play/FindPost/145914Mon, 02 Mar 2026 22:25:40 GMTI am looking at improving the ratio on the SW20. As the AW/AE86 has a quick rack, I would like to know if anyone has successfully fitted this rack to a SW20. If anyone has attempted this, what was the restriction in the conversion...https://www.classic-ford.org/mr2/mr2play/FindPost/112368Sat, 30 Apr 2022 12:36:26 GMTMy rear toe links have the ball joint inner end. They both have play and the OEM part is no longer available. Has anyone been successful in rebuilding their link by pressing in a new bush? Is there a similar joint that can be made to work from an aftermar..https://www.classic-ford.org/mr2/mr2play/FindPost/145120Wed, 16 Jun 2021 09:44:27 GMTDoes anyone have a aw11 standard wheel alignment sheet? I went to get an alignment and they did it to a sw20 spec.Interested to check if there are major differences...https://www.classic-ford.org/mr2/mr2play/FindPost/145113Sat, 12 Jun 2021 19:27:52 GMTAll,I've read plenty of old posts about suspension, just wondering if pedders sportsryder extreme xa coilovers are any good now in 2021? I'm coming from struts and king springs. I don't track my sw20 gen2 turbo but enjoy some very spirited runs through ru..https://www.classic-ford.org/mr2/mr2play/FindPost/145078Sat, 22 May 2021 23:54:31 GMTHi, In May 2017 I fitted a set of Intrax IK2 coilovers to my MR2 (March 1991 GT), at which point I had done 92417 km according to the receipt. I've now just replaced them with a rather more road biased set of MCA custom coilovers at a distance of 96023 km..https://www.classic-ford.org/mr2/mr2play/FindPost/141470Mon, 18 Jan 2021 23:30:22 GMTChasing a clunk when i hit a straight edge bump with both front wheels I found the swaybar has been contacting the body on both sides. The car has unknown yellow (king I assume) springs and is lower than stock. Is this a problem when lowering with the sto..https://www.classic-ford.org/mr2/mr2play/FindPost/144510Wed, 02 Dec 2020 21:41:24 GMTAfter just registering the mr2 and a good amount of driving kms on it i have noticed an alarming amount of bump steer, mostly front but some rear. I have read through various threads across the internet but there doesn't seem to be much of a consensus on ..https://www.classic-ford.org/mr2/mr2play/FindPost/144167Fri, 26 Jun 2020 15:48:25 GMTHi All, I am wanting to change my Rev1 Front Links to Rev3 and just wanted to confirm that whats on the car is actually Rev1 and the fronts that I have are Rev3. This is whats on the car currently.https://lh3.googleusercontent.com/9UCG0X3ZRTnGWU-crtvIxIQ_..https://www.classic-ford.org/mr2/mr2play/FindPost/144007Fri, 15 May 2020 20:44:25 GMTThe suspension on my 1990 N/A SW20 Rev 1 was very tired so I did some research and settled on BC Racing coilovers (https://bcracing.com.au/c-12-ra) and Prothane 18-2009 Red Total Kit ($153 from Amazon). In order to remove the factory struts you need to un..https://www.classic-ford.org/mr2/mr2play/FindPost/143937Thu, 30 Apr 2020 08:57:38 GMTSo I've been a busy beaver, I've changed every suspension bush in the car, changed the front and rear ball joints and fitted coilovers. Next up I'm fitting new adjustable swaybars. The front went in fine but I can't figure out how to install the rear sway..https://www.classic-ford.org/mr2/mr2play/FindPost/143727Tue, 28 Apr 2020 12:09:52 GMTI've just finished upgrading the suspension on my 1990 Rev1 NA SW20, I've been reading the Toyota MR2 Performance book and it provides some wheel alignment specs. It recommends front toe out of 0 to 1/8" (0 to 3.2mm) but it recommends rear toe in of 3/16"..https://www.classic-ford.org/mr2/mr2play/FindPost/143572Thu, 06 Feb 2020 16:36:03 GMTI'm doing a heap of work on the suspension of my Rev 1 SW20. It's getting coilovers, brake lines and bushes this weekend. I've also got front and rear swaybars but I don't want to fit them until I've got some swaybar reinforcement plates. Does anyone know..https://www.classic-ford.org/mr2/mr2play/FindPost/143552Wed, 29 Jan 2020 12:57:44 GMTHi all, Looking at buying a 1990 rev1 Turbo. I keep reading about snap oversteer and how dangerous the rev1 is compared to the rev2 onwards. Is it all that bad? Can this be improved or completely fixed now with more modern parts? I'm not one to push a car..https://www.classic-ford.org/mr2/mr2play/FindPost/142711Mon, 13 Jan 2020 09:47:19 GMTI'm in the process of ordering new tie rod ends and ball joints for my N/A 1990 SW20. The front and rear ball joints seem to have the same part number, is this correct?..https://www.classic-ford.org/mr2/mr2play/FindPost/143374Mon, 30 Dec 2019 10:15:49 GMT