Regular
sbclover
Will the brake booster bracket need any mods to fit twin carbs with a 3.1in high manifold. Still tossing up carb options? I like the look of the piper cross air cleaners, Has anyone put them on a xflow with twins and brake booster still there? thanks Sean..
2011/04/09 21:55:50
BrandonC
Hey just wondering if anyone can tell me a decent electric fuel pump i can get for my 1.6l, its got a single 32 DGAV, ported manifold. full exhaust, electric ignition. I wanna gte rid of the mechanical fuel pump. and replace with a electric one with a regulator. Will adding a tiny bit more fuel pres..
2011/04/03 17:25:24
Hey guys, just wondering what a relativly std 1600 rev to before things start breaking. Sayy, a 32dgav, head work, exhaust, electric ignition. Id like to fit a rev limiter but tomuch hassle atm. Cheers...
2011/03/17 23:26:09
ratta tat tat
Would it be safe to assume that a block with this code accompanied by a twin choke weber would be from a pre-emmissions 1975 escort? 1.6 High compression?..
2011/03/14 21:51:11
Hey guys just wondering if its bad or if there is goodm in putting a 1300 head on a 1600 block. The head is recond, ported, std valves and new rockers. Would there be any problems with putting the 1300 head on a std 1600 bottom? Cheers, Brandon...
2011/03/10 06:23:21
hak073
I noticed on the weekend my car doesn't have a fuel filter on it, so I was going to put one on. I am just wondering what is the best spot for it. I was thinking before the fuel pump to stop any crap before it gets in there, but is a stock 1300 pump able to draw through a filter? Or is it better to p..
2011/03/08 16:28:52
Guym
Does anyone know where I can fit my oil temperature sensor on to my 1650 xflow. The sensor is 1/8" which I understand is the usual standard. Some one mentioned the LMA adapter which replaced the sump plug. Does anyone know the xflow sump plug thread size as the LMA options are 12 x 1.25, 12 x 1..
2011/02/14 19:21:22
craig chima
Perhaps someone with more experience with this kind of thing can offer some insights here! I have been looking for the highly desirable Ford AX block for upcoming vintage race motor project and found someone who claims to have one. Can someone "in the know" advise if the casting numbers be..
2011/01/29 09:48:53
harrier
Hi, Getting a bit frustrated here with the twin 40 Dcoes on a 1600 (ported, big valves, etc), 638 grind cam. Its constantly fouling the plugs (1 & 4) are the worst and really doesn't want to idle or even clear up to rev. I've checked the jetting which matches with a few sources of std settings..
2011/01/24 20:47:10
Anyone running injection on a Kent ? Any thoughts/feedback on how well they do/dont run un efi ?..
2011/01/19 22:37:30
