Engines - Crossflow / Kent / Lotus

To Bottom

Engines - Crossflow / Kent / Lotus (p.11)
Post New Thread
Regular
eamonlad

1.6 engine

hi im looking to replace my mk1 1.3 to a 1.6,has any one got one for sale im in adelaide cheers..

2011/09/08 08:29:39
ari

Crankshaft

Wot is the acceptable runout on crank?..

2011/07/31 14:01:14
ari

Oil pumps

Has anyone ever used one of these? Great wet sump system drawing from the side of the sump. http://www.omnitech-engineering.com/auto/ReMarque_May-Jun10_p10-11.htm..
2
2011/07/22 08:24:18
BrandonC

Smoke coming out of the rocker cover breather.

Hey guys just asking what it's from or if somthings happen? I just did an oil change/flush an also put an oil catch can in, only have the pcv valve hose going into it ATM and a a breather on the rocker cover. And when it's running it has a fair bit of blue smoke that comes out the rocker cover. The ..
8
2011/07/19 20:39:15
BootOn

Chambered heads

Hi Does anyone know the combustion chamber volume of 681F chambered heads for 1300 and 1600? Cheers..
8
2011/07/13 19:36:31
smallvan

Anti dieseling device

Do i need it on my 1600,or can i chuck it away And how do you run your breather pipes from the sump/rocker cover to your air filter Regards James..
3
2011/06/08 14:18:54
BootOn

Engine mounts

Hi Just wondering if anyone can confirm the correct thickness of the rubber engine mounts for a crossflow into MK2 escort manual. Are they supposed to be the same thickness on both inlet/exhaust sides (Mine are but i suspect they aren't meant to be)? Cheers..
1
2011/05/30 15:57:44
mk1escort73

1600 rev count

Wanting to know the average revs a 1600 would sit at doing 80 in fourth gear cruising??fitted a new tacho today n after ideas!!..
1
2011/05/06 00:16:51
rsgerry

1600 x flow into Anglia

i have pulled the 1500 from the Anglia apart and one piston has a hole and it needs a rebore. there is probably a lot of other thngs that need doing that i just dont know about at the moment. as such, it could get a bit costly to rebuild the 1500 right now as the car is being done on a budget. so, h..
3
2011/05/01 10:53:00
stuart h

1600 x-flow coil wiring

Hi i have just bought a mk2 escort with a 1600 x-flow but its missing a coil and i am not sure where and what wires should be connecting to it. all so where is it normally bolted in the engine bay. if i can get a photo or a simple schematic it would be great! also since i need to get a new coil w..
4
2011/04/13 22:10:01

<< ..10 11 12 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account