Engines - Cosworth / Zetec / Duratec

To Bottom

Engines - Cosworth / Zetec / Duratec (p.5)
Post New Thread
Regular
the_cheese

Zetec and brakes

Hey guys, riding off the back of the 'to zetec or not to zetec' post I thought I'd start this discussion without hijacking the original thread. When putting a zetec into a mk2 , is there anyway of retaining the brake booster? Ive already been told no, but I was just wondering what others who have do..
2
2012/11/23 17:35:22
Juiceman

Zetec + t/b's - ECU options?

Hey guys, I know there are lots of options for ECUs out there, and you can even buy t/b kits with an ECU (Omex etc) from the UK, however I'm wondering what other peoples experiences are in Australia with regards to an ECU that will work well with the Zetec, and one that tuners in Australia actually ..
23
2012/11/18 21:43:51
lotuselanman

Zetec

Hi, Fitting a Zetec engine to an Anglia Wagon. Will get a fair bit of stick and occasional runs at Street meet Drags. What is the idea temp to run the engine. I will be able to program the Electric fan and the Electric water pump via the EMS as desired. Thanks. Les...
1
2012/11/12 20:13:48
kistaaal

Cosworth into mk1 cortina

How's it going I have a mk1 cortina 4 door that I would like to put a cosworth motor into I have a engine lined up but just curious as to other modifications that will be needed obviously cutting tunnel which I've already done to fit a celica five speed behind my 1600 and also you have to change the..
5
2012/11/10 20:10:39
lotuselanman

COSMIC - Please speak to me re BOA,s forsale.

COSMIC, I am interested in a couple of BOA engines but you have replied to my request. If anyone knows Cosmic could they give him a nudge!! Cash is awaiting your pocket if you have what I want. Les. les.mellor@bigpond.com 07-3294-6888..

2012/11/07 18:15:33
ash

Rings for Cosworth pistons

Hi guys, Trying to get rings for Cosworth "racing" pistons that I bought from PEC a year or so ago. Neither Cosworth UK or PEC have rings for them - yeah, go figure!! Cosworth say that these were "special" build for PEC and they made no spare parts for them - great! PEC say speak to Cosworth. Awesom..
3
2012/09/12 17:49:05
ash

YB oil pump - same as which pinto pump?

Guys, Have pulled my 1000km old YB down to find bearings and pump are already worn quite badly - pump with significant scores in the rotor and housing - looks like I've had a bit of oil starvation at some point despite my winged and baffled sump :( Anyway, need a new oil pump, and I remember m..

2012/09/02 11:35:09
cosmic

V6 quad cam cosworth info

Hi guys ive fitted this motor to my escort running a supra box was wanting to know what performance upgardes or info that you would have or know of THis has to stay normally aspirated its the only way that it will stay engineered so any ideas or sites ect Thank you..
12
2012/08/25 09:26:13
ash

Cosworth pf01 TPS and Autronic?

I know a there is a few of you on here running Autronic ECU's on cossies. The word on various forums is that the pf01 tps is not suitable for aftermarket ECU's due to the "open circuit" switch used internally when throttle is closed, rather than it being a totally linear potentiometer. Is this..
3
2012/08/01 12:39:22
ash

YB hotspots and heater hose

Hi all, I've got the yb in and running, but I'm concerned that I might be getting hotspots in the head since the engine smells warm (after a month of running, so it's not paint drying ). The temp gauge in my thermostat housing only shows 80-90 deg C same as the one at the back of the head. ..
4
2012/07/26 19:24:12

<< ..4 5 6 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account