Engines - Cosworth / Zetec / Duratec

To Bottom

Engines - Cosworth / Zetec / Duratec (p.10)
Post New Thread
Regular
Suttonmotorsport

Silver Top vs Black Top 2.00lt Zetec

Hi All. I would like peoples opinions on Silver Top vs Black Top. Known problems, rod/piston/crank strengh, head flow etc etc. VVT/VCT???? Will be using either R1 carbs or throttle bodies along with a Megajolt style of ECU. If anyone has some engine spec's on their own engine that they have..
5
2010/11/22 09:45:25
ash

Cossie water fittings/lines

Can anyone out there help with the location of water lines to/from the turbo on a YB? They dont go "in-line" with the heater circuit do they? Do you install a couple of extra fittings in the water pump and radiator top tank to feed the turbs? Cheers Ash..
16
2010/10/04 19:02:17
The Outsider

Building N/A Cosworth Questions

ok this will probably get more attention here than berried in the other thread<blockquote id='quote'><font size='1' face='Verdana, Arial, Helvetica' id='quote'>quote:<hr height='1' noshade id='quote'><i>Originally posted by The Outsider</i> <br /> my intention is of building an N/A cossie with t..
11
2010/09/30 17:00:52
BootOn

Zetec on Carbs

Hi I'm in the early stages of a 1.8 zetec conversion and i'm trying to decide what to do on the induction side of things. I aready have a set of twin 40 dellorto's so they would be the cheapest solution but i understand they will probably give me a flat spot in progression phase. I don't want to ..
66
2010/08/23 11:39:21
fahley

Valve clearance minimum

what is the minimum clearance beteen valve and piston cutout ? Im setting up a N/a street car and have around 0.7mm. Ian..
4
2010/08/17 19:07:57
Suttonmotorsport

Zetec compression ratio limit

Does anyone have experience with machining Zetec heads? The real question here is how much can be removed before the std cams/valves start contacting the pistons. I am looking to have a C/R of between 11-11.5:1. Thanks Craig..
3
2010/08/12 23:13:09
TEX

ST170 here we come,

Oh yeah! here tis the new power plant to get my car crackalacking! Stay tuned. http://classic-ford.org/forum/uploaded/TEX/200981820231_Image0260.jpg..
19
2010/06/30 21:46:45
Sterling

carburetted zetec, ignition?

how have people done there ignition setups on ZETEC's without using efi system? (ie running twin carbs or quads) cheers..
5
2010/06/09 12:32:19
Blunny1

Duratec bits

Just found this on the UK Duratec site. Its just getting better to do this conversion. Wet sump kit http://www.duratecperformance.co.uk/forums/ubbthreads.php?ubb=showflat&Number=2128&page=1#Post2128 Cheers..

2010/05/21 12:09:02
whoppa

cossie rebuild...

hey guys ive got a cossie head and 205 block... looking at just a freshin up on both items... the heads neva been skimmed acording to phill "who owned they head" so what needs doing what seals bearings and so on will i need.. and do they make a kit or do they have to be measured and m..
6
2010/05/09 20:23:36

<< ..10 11 - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account