Engines - Pinto

To Bottom

Engines - Pinto (p.8)
Post New Thread
Regular
Drewdog

Pinto head porting advice....

Hello all,So far an old dogs learned a few new tricks doing the Yellow RS project and it's time I plucked up the courage to have a go at porting a head, I've been reading the Vizard and power tuning SOHC books but have a few questions so bare with me...It'll be using 44idf's that I'm set on, with so..
21
2014/06/22 22:55:53
Matt75

Stroking the Pinto to 2.2ltrs

Hi Guys, I am just getting started on gathering info on building up my engine to handle a few tracks days and a bit of spirited driving. I have been on Turbo Sport http://www.turbosport.co.uk/showthread.php?165466-pete-a-2-2-197bhp-pinto&highlight=how+to+stroke+a+pinto and just wanted peoples op..
37
2014/06/09 14:44:21
ratta tat tat

Mild Pinto rpm @ max power?

Hi, can anyone have a guess what the RPM would be at maximum power, 2.0 pinto with crow mild street cam? Standard 2.0 is 70kW @ 5200rpm. Thanks (26874) FORD 2000 OHC Mild Street Cam$247.50Add to Cart Part Number 26874 Lobe Separation 114 Valve Lift Inlet Opens 24.5 B.T.D.C. Inlet Closes 70.5 A.B.D.C..
21
2014/06/08 00:11:24
Drewdog

Pinto build, advice please.....

Hello all, its engine time for my RS project so I'm doing a plan and I've got a few questions............I'm set on a mild pinto on carbs (bit old school that way) that I can build myself and maybe do the odd hillclimb or regularity with. Max horsepower is not the aim, just a bit of fun that I can b..
19
2014/05/28 21:09:47
RSman4ever

piston ID

Just took the head off a 2.0 pinto and im after some info on the marking stamped into the pistons so I know what rings to order RA2526X 1.00 TOP 0.04 B1 They have flat tops but on the side facing the front of the engine there is a small V shape notched into each one, whats that for? Thanks..
4
2014/05/21 14:16:38
MK2 Pete

Help with Pinto Alternator Bracket

Hey Guys, I'm looking for advice in regards to my alternator bracket on my pinto. Short story even shorter, the standard units keep failing on me (shearing off on the shaft). I've heard its a common problem with pintos, therefore I'm hoping there is a common solution? Any advice? Pete..
2
2014/05/06 09:12:53
war

compression ratio 10.5:1 measurements please. pinto 2L

doing up my head on pinto 2Li know i should be starting with a 1.6L pinto head, but where do you find them?so can someone help out how to get the 2L head to the 10.5:1 compression ratio, i guess the only way is to machine the head, does anyone have the head height measurements to get that compressio..
14
2014/03/03 21:05:07
capri69gt

Pinto Turbo, a very serious engine combo

Was just having a troll around the internet and found this link, a 1000 HP capable pinto.......... Freaking Heck, then found a second link to a carb turbo pinto also. Check em out. http://www.youtube.com/watch?v=qsBOUJ5MQrI 1000 HP Pinto from youtube......... http://www.raceandfuntv.de/?q=node/13 is..
1
2014/02/18 16:03:56
war

2L exhaust for pinto recommendations

I have pacemaker big bore extractors, and its for fast street.The old had muffler and hot dog,Exhaust i was thinking 2 1/4" and recommendations...
5
2014/02/11 09:03:34
war

FR33 kent cam what timing are people running.

is the old rule of advance till it pings ok is that a bad idea?engine build10.5:1ported headtwin 44idfs weberspacemaker bore bore extractorsH&H dissy (no vac advance)fr33 kent cam kit...
6
2014/02/05 21:45:18

<< ..7 8 9 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account