Engines - Pinto

To Bottom

Engines - Pinto (p.13)
Post New Thread
Regular
sundowner

oil catch cans. running pinto show me what you are running

id like too see some pics and get some feedback on what people are running when it comes too oil catch cans, Its a turbo injected pinto and i have some ideas but id like too see and here what experiences others have had. Cheers Glenn..
11
2012/08/28 17:48:18
ratta tat tat

Qld Mod Plate- Mk1 Pinto

So for those who have been through the mod plating processs in Qld for pinto in a MK1, can you please share some info! My shell is a 1970 MK1 1300 auto with mild 2L pinto, 32/36, extractors, standard 4 speed manual, 1.6 single piece drive shaft. From what I've read so far I might be needing (please ..
5
2012/08/28 17:21:39
Polo

Twin 40's on a pinto any good ?

Hi just a few questions to bounce of any body . Are twin 40's any good on a 2l pinto car will be driven most week days and Sunday occasionally at track days and hill climbs . Any advise would be good..
13
2012/08/25 06:29:03
RSman4ever

fly wheel

Hi guys not sure if this is a stupid question but will a 1.8 zetec flywheel fit a pinto? I know people use pinto clutches on 2.0 RWD zetec swaps and some use the 1.8 fly wheel instead of the 2.0 one cause its lighter etc etc..
1
2012/08/24 00:26:00
wombat2509

Engine Oil

Hi Guys I have a Pinto in my Capri,I was wondering what would be a good oil to use, the engine has just been run in it is only used on weekends. It has stock internals, double valve springs with a 26874 crow cam, with a 5 speed behind it. John..
21
2012/08/23 19:18:40
EskyRS

Bolt for Oil Spray Bar on a Pinto 2.0

Hey Gang, I am just about to start working on my RS after having it parked in my shed for the past 20 years! I had the engine rebuilt about then, maybe 18 years ago and the guys never put the oil spray bar back on. I have a new one ready to go, but cant find any detail regardin bolts for the install..
4
2012/08/05 09:23:59
ratta tat tat

Pinto crank keyway?

I picked up a single crank pulley to replace the double pulley. It slips over the crank but the crank key is too slightly too high for the slot in the single pulley making it a very tight fit (nylon hammer gets it on a few mm then I removed it) Has anyone else encountered this before and what was th..
3
2012/07/16 21:23:54
wayovermyhead

Avgas and ignition timing

Hi all, So the car i just bought has a pretty worked and stroked Pinto. The CR is pretty high but i'm not sure what it is exactly. It's currently running on and tuned for Avgas by the previous owner (who has run it on 98 but didn't do any of the timing/tuning on it so is no help). Already it's more ..
3
2012/06/28 09:29:33
Prodraw555

Someone bought a bargain!!!

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&_trksid=p4340.l2557&hash=item4ab8d1424f&item=320928301647&nma=true&pt=AU_Car_Parts_Accessories&rt=nc&si=69ZPUSDA6s4WzregUBBRzvfi8u0%253D&orig_cvip=true&rt=nc..
7
2012/06/20 19:05:00
ratta tat tat

part No. 2L Escort starter motor, manual

...............

2012/06/03 20:33:03

<< ..13 14 15 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account