General Capri Discussions

To Bottom

General Capri Discussions (p.3)
Post New Thread
Regular
wombat2509

Need help finding Longer wheel stud

Hi, I have had alloys on my car for 10+ years it’s a 1600 converted to 2 litre I took it to a new old mechanic last week and he rang me to say I needed new wheel studs as mine are too short. It turns out that they are the originals and only hanging on by about 6mm of thread. The big problem I’ve ha..
6
2024/02/29 19:08:13
in rod we trust

ebay / gumtree adds

thought id post a thread for good or bad deals on ebay and gumtree and i think this one takes the cake of the day think he may be on crack . http://www.gumtree.com.au/s-ad/bundall/miscellaneous-goods/ford-capri-gt-3000-v6-bonnet-cars-rare-hood-new-old/1133683821 http://www.gumtree.com.au/s-ad/bundal..
469
2023/11/24 20:28:07
1970GTCapri

Forum Newbie - Proud owner of a GT V6 Capri

Hi All, Just popping in to say hello to you all, I am new to the Forum and an owner of a 1970 Mk1 GT Capri. I have owned the car for about 6 months now and would be interested to know if anyone knows any of its history, see info on the verification letter from Ford for further information.Also, I'm ..
19
2023/10/04 09:36:58
Timmo

Driving Light Globe Capri Mk1

Hi All,I am having trouble locating a replacement globe for a genuine Mk1 Capri driving light. Can anybody help or recommend an alternative? the original is a Cryselco 45W No 185.Thanks,Tim..
17
2023/08/09 16:06:41
GTV6

3D Printing Parts

I've touched on this before and have finally got around to giving it a go on a clutch boot. From photos found on this site and taking measurements off the car I made a cad model of a boot and 3D printed a rough part for verification. Next step is to tweak the model, add the stiffening rib details an..
32
2023/06/24 14:54:32
Rogerm

New Capri Member - Melbourne Australia

...
8
2023/06/08 15:28:14
Reeni

Cooling system

Need help in finding a diagram or clear picture of where heater hoses connect on a Capri v6. Water pump, etc lead too. The bottom and top radiator hoses replacement is obvious. Any help appreciated. Or may be a case of buying a detailed service manual . If any one has one for sale personal massag..
1
2023/06/07 22:13:17
GTV6

Looking for NSW V6 engine

Hi EveryoneWould anyone have V6 engine JE1496B lying around? Originally a NSW car. Also does anyone know what car had the V6 with CK13 as the engine prefix? Thanks...
2
2023/04/17 01:37:54
P S Robbo

V6 Capri tie rod ends bottom out on thread.

Hi, have just replaced the tie rod ends on my V6 Capri from Yesterford. The prosteer they sent are about 5 mm longer then ones removed and bottom out on the thread and as such I can't wheel align the car because I'm short of thread. Anyone else had this problem. These are the ones they have been sel..
3
2023/02/11 22:11:24
krusto

Help with front wing profile

Hey all!Just chasing any help I can get with the front profile of the wings (the arch around the side of the headlights). Of course the Ex-pressed panels were different and not well made! We had this issue with all the panels they shipped me. So now the profile on one side is different to the other...
6
2023/02/06 08:51:11

1 2 3 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account