General Capri Discussions

To Bottom

General Capri Discussions (p.27)
Post New Thread
Regular
Modena RS

Wayne Stockman's Aussie Capri GT/V6 Article

Nice article, fabulous resto.http://www.themotorhood.com/themotorhood/2015/3/26/1971-ford-capri-3000gt..
6
2018/02/22 16:24:25
Btad

Crossmember

Has anyone bought a v6 crossmember from xpress panels at all?..
3
2018/02/17 00:10:14
Wiggy333

RS 3100 for sale on Carsales.

Sebring Red. If only I had the money. $87000..

2018/02/11 15:45:43
capri69gt

V6 Rocker Covers Custom Cast Ally

Hi all if your looking for something a little different to finish off your Essex V6 I have the pattens to produce the molds to cast the rocker covers as shown in the pic attached, I purchased these with the car last year. If any one is interested in some sets I may be able to get a few sets cast. ..
3
2018/02/11 01:23:58
Wiggy333

V6 gaskets.

Hi trying to fix air bubbles from radiator. Pulled motor out to do head gaskets but seem fine. So firstly can you use a DPort gasket set on an oval port (someone used a DPort inlet manifold gasket before). Secondly why does it seem to have almost a matchstick head hole for water galleries ( should t..
19
2018/02/03 16:14:04
in rod we trust

bonnet hinge

hey boys was wondering if anybody has a spare bonnet hinge they dont need and want to selli think by looking at them left and right are the same cheers..
10
2018/02/02 17:03:48
P S Robbo

Front / rear windscreen installation. Capri

Hi guys. Was after advice on front and rear windscreen installation. (Its been a while since I took them out.) *Are the chrome inserts installed in rubber before windscreens are installed?( that is how they appear to do it on youtube vids) *On the front screen is the chrome insert join on the top or..
11
2018/02/01 21:10:59
Timmo

Super Roo Stickers

I have a question re: Super Roo stickers on the V6. Were they an option, as quite a few V6 Capris don't seem to have them fitted? Were they a dealer fitted item or did the cars come from the factory with them fitted? Were they fitted to all 3 years, ie 70, 71 & 72?I'm thinking that a lot of Capr..
2
2018/01/30 19:40:59
Wiggy333

V6 diff bearings

Trying to do a fix up on a V6 diff which has a bearing noise not a whine. I replaced the wheel bearings and it’s still there. I’ve pulled apart another diff and also have a new 3.09 setup. I’ve got the bearing numbers for the center and one bearing number( the easy one from the pinion) but there is ..
5
2018/01/24 17:06:32
in rod we trust

polished alloy dash rings

hey all had some spare time so mucked about with a veneer dash and also inserted the polished alloy pre facelift dash rings from the bloke in poland.. had to slightly bend speedo and rev tacho rings to fit dash better i think it came out ok .. had to make the veneer in two parts main speed and also ..
10
2018/01/22 01:27:17

<< ..25 26 27 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account