General Capri Discussions

To Bottom

General Capri Discussions (p.19)
Post New Thread
Regular
Wiggy333

Expressed Steel Panels.

I have a quote now for A pillars and rear wheel arch repair panels. One A pillar with delivery had a postage quote of $198 which seemed too expensive. I have another quote now for two A pillars and rear wheel arch repair at a more reasonable $248. This however has a total price of $1150, so my quest..
18
2019/01/02 17:36:08
gtv6capri

D Ports heads, Inlet Manifold and Timing cover for sale

I have the parts you need to convert your Oval Port motor to D port, you get 2 "D" Port heads, an inlet manifold and a Timing Cover. $900..
6
2018/12/16 08:45:44
spud15

Capri for sale

I..

2018/12/13 10:37:50
gtv6capri

Capri Single Leaf Rear Springs $200

Pair of used single Leafs as per RS3100 and 2.8i but will fit all models needs a sandblast $200 pick up Berwick Vic..

2018/12/13 09:23:42
gtv6capri

Capri N.O.S. V6 Bonnet and Slam Panel for Sale

Yes genuine New Old Stock, V6 Bonnet and radiator slam panel, $1999 the pair, collect Berwick..
4
2018/12/12 22:56:30
reglecont

Mk1 Capri steering column grommet

Can anybody tell me where I can source a new steering column grommet for a mk1 Capri?Cheers..
2
2018/12/09 13:02:00
old capri v6

Mk1 Fibreglass parcel shelf needed

Does anyone have the contact details for the guy who sells front parcel shelf for MK1 Capri.Cheers Mark...
2
2018/11/16 20:09:28
P S Robbo

capri V6 Engine removal.

Hi All, I have to remove my engine and gearbox to repair leaks etc. Is it easier to remove engine with gearbox attached or together or should I remove engine first then gearbox seperate? Just getting views before I start. cheers Paul...
4
2018/11/15 18:22:18
Timmo

Throttle Cable Replacement

Has anyone replaced a throttle cable on a V6 Capri? It appears the outer is attached to the firewall behind the brake booster and with no room to get my fingers past the booster it seems almost impossible to get any sort of tool past the booster to undo whatever it is that attaches the outer to the ..
3
2018/11/12 12:09:03
P S Robbo

Overheating after cylinder head repairs.

Hi Guys, Advice required.Have just rebuilt V6 capri heads / gaskets etc due to oil leaks etc. After putting all back together and running. The car now overheats after 5 minutes at idle. Never overheated before the pull down. Any suggestions on why?Also, the car manual says to re-torque the cylinder ..
17
2018/11/06 21:34:49

<< ..19 20 21 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account