General Capri Discussions

To Bottom

General Capri Discussions (p.14)
Post New Thread
Regular
CapriWannaBuild

2.8i capri engine

Need help, I looked around I have found no videos or posts on a cologne 2.8i v6 engine rebuild etc, if anyone can help or source something be much appreciated..

2019/12/03 08:29:26
Stanspeedautocare

Wanted alloy rocker cover

Alloy rocker cover req prefer burton..
2
2019/11/25 15:19:00
NeilR

D-port heads - std to modified.

I started cleaning my D-port heads today, first with degreaser and then sand-blasting. Of interest was every port had a carbon build up in the same part of the bowl on each port...
3
2019/11/24 09:34:22
Benny

Capri GT dash fitment into poverty pack Capri.

Hi, Just fitting a GT 6 Dial gauge cluster into a standard 1600 4cyl 2x dials car, cannot work out the volt gauge wiring, or perhaps I have a dead gauge, ran a wire of rear positive alternator, nothing worked?. Any ideas. Thanks Ben...
3
2019/11/23 23:55:37
old capri v6

Free to a good home but there is a catch.

Hello,Free to a good home a couple of "old" 4 speed gearboxes, shifter stuff and a couple of drivers side pipes ( see photos)One gearbox is from my car which now has a 5 speed, I robbed the input shaft for the Toyota box. Cant remember if it was any good at the time, was 30 odd years ago. 2nd box ma..
2
2019/11/22 08:46:37
GTV6

138Hp or 165Hp

Ok all the talk recently about the 165HP specials and gearboxes had me heading to my Capri books and I noticed that two of them say the same thing, that in Oct 71 Ford UK added D port heads, new cam profile, 38 Weber and a viscous fan coupling for a power increase of 10BHp, bringing it to 138Hp. I c..
44
2019/11/17 15:37:11
P S Robbo

V6 Engine Number location.

Hi guys, simple question. where is the engine number located on a V6 Capri engine? cheers PSR..
7
2019/11/14 22:28:08
Den

Good morning

Just wondering if any one out there knows, or has an understanding of trademarks? I have a number of items which marked with this attached image. I will appreciate your knowlage. Thanks reeni..
3
2019/11/09 18:19:14
old capri v6

Master cylinder / booster seal?

Any advice on a seal or o-ring between the mater cylinder and the booster??Have been looking at the protex master cylinder for a MK1 escort (yes I now it doesn't fit) but it looks similar and it shows a square profile o ring fitted on the body that fits inside the master cylinder . Anyone had experi..
2
2019/11/06 12:27:15
Den

Help with its age please,

Fomoco silentbloc sm3004 , could this be any of the earlier BS engines and componits..
25
2019/11/05 18:05:17

<< ..13 14 15 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account