General Capri Discussions

To Bottom

General Capri Discussions (p.107)
Post New Thread
Regular
GerrysV6GT

Who wants an RS?

So tell me, how hard is it to ship a car out from the UK?? We can always dream.... http://cgi.ebay.co.uk/FORD-CAPRI-RS2600-OLYMPIC-BLUE-IMMACULATE-CONDITION_W0QQitemZ170443663115QQcmdZViewItemQQptZAutomobiles_UK?hash=item27af3be70b..
5
2010/02/13 22:23:50
ronsmallford

Lumenition and tacho.

I wired up a lumenition ignition and it works fine but the tacho is dead. The tach is still wired as the diagram shows and the resistor wire then proceeds to the plus terminal on the coil. Apparently the electrical impulse has been changed somehow making it hard for the old tach to read. What have o..
6
2010/02/09 10:33:29
Smcka

Steering coupling assembly wanted

I need the complete steering coupling assembly for a mark 1 Capri. Can be shagged, just need it for research. Stephen 0413 389 332..

2010/02/07 13:14:32
mac1capri

Cigarette lighter

HI All, I know these things are used much anymore, but now i'm using an ipod i kinda need one now - so i rumaged through my spares and have found 3 of them - all of them (at the back) having a bullit connection in the middle, and a spade slightly to one side, however, when i go to my manual it sh..
3
2010/02/02 00:23:27
muzwaldo

Front hub nuts

Its time for me to assemble my front struts and the nuts that were on the stub axles originally are knackered. There were mismatched washers behind the nuts on each side. So I want to get all new correct stuff. What actually is required? I assume a castelated nut, a washer and a split pin? Can someo..
4
2010/01/27 13:25:22
Wattsy

Beevers Auto Panels

Found this guy on ebay uk. Anyone bought from them before and what were their panels like? <insert alternative> Express panels are too much so not them...
6
2010/01/23 20:08:10
2lt_Scort

Cheap Rostyles - VIC

Hopefully someone can make use of these. They're not mine but thought their may be some interest here. http://www.fordforums.com.au/showthread.php?t=11285042 Rhys..
1
2010/01/13 21:53:40
GTV6

Hose Sizes?

Hi Guys, I have just got my recond engine in and am going to go back to a weber and am just trying to fit up all the hoses. Problem is the fittings are all different sizes. The auto choke on the carby has 1/2" fittings but the top of the water pump is 5/8" Also the heater fittings a..
3
2010/01/13 20:42:27
GTV6

Need Advice for Suspension Upgrade

Hi Guys Next job for me is to renew the suspension. The car is now so low that it is bottomed out so I want to raise it but not all the way to original. Maybe and inch or 2 lower than standard. Also want a smooth ride, so dont want it to be too stiff. Any ideas for a nice combination of springs and..
28
2010/01/07 21:56:58
mac1capri

engine block weight

can anyone tell me what the approx weight of a dry essex engine block is ? without all the fruit on it. I am getting one sent from Melbourne and they wanted to know the approx weight - i said about 30kg - does this sound about right ? for the dimensions i put 50cm x 50cm x 50cm on a pallet. The quot..
5
2010/01/06 19:24:34

<< ..106 107 108 - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account