Regular
ulsterman
Looking for an Inlet Manifold to suit a Single 45 Weber to fit a 2 Litre engine for my sons Escort. The existing Lynx one is too wide (about 132mm roughly)and too hard to change the Airfilter as I can barely get a credit card between it and the Inner Guard. Does anyone have one of the shorter manifo..
2011/02/25 16:45:09
2lt_Scort
Long shot but..... I'd like to make my RS seats a proper pair I'm missing the drivers side one. If anyone happens to have two drivers and no passengers, then I'll swap you one? Condition of mine is - would need re-trim to look anything special so Im seeking something similar? I'm in SA and its..
2011/02/24 07:42:39
mk1escort73
After a mk1 bonnet to suit a 4 door if they are any different to a 2 door Good condition..
2011/02/20 19:53:30
onlykev
I need a rotor for the motorcraft distributor on my sierra efi in the escort. Please help. This is only the start of my problems...
2011/02/19 12:32:58
muzza
I need to dial in about 3-4 degrees in camber so any strut top to assist with this would be great...
2011/02/19 07:41:08
BryanS81
Looking for the above, should really look at my donor too but not sure if the diffs are different with the sway bar attachment? Anyone? And what would they be worth? Cheers Bryan..
2011/02/18 23:11:21
joeyjonsey
i have a 2l motor which apart from one piston being semi seized on the rod, is in good condition, if anyone has a left over piston from an old motor or something they would part with and help save this motor, would be apprec'd..
2011/02/17 20:03:08
Gdub
I figured this is worth a shot ... I am after a rear glass with a demister for my MK1 2 door. I have tried one of the aftermarket stick on kits but they are pr1cks of things to get to stick properly and even harder with a full cage in the car! I dont mind if its an after market demister as lon..
2011/02/16 21:54:47
eamonlad
im looking for mk 1 or 2 mk2 escort in Adelaide,dosent have to be preety as i want it for a project cheers eamonlad..
2011/02/16 10:02:32
BrandonC
Hey Im in need of a 2L pinto, for my mk2 esky, Cheap, Good rebuilder or a worked one. Either way. Preffered if it was close to Toowoomba, Willing to drive up to 3 hours to pick it up. Cheers, Brandon...
2011/02/13 16:13:55
