Turbo Charging

To Bottom

Turbo Charging
Post New Thread
Pinned
Admin

This forum will be turned off in the next 6 to 12 months

I will be turning off the server that runs this forum in the next 6 to 12 months. I run multiple discussion forums on it and since the introduction of Facebook Groups, usage of the forums has steadily decreased. The result of this is that revenue from Google ads no longer come close to covering the ..
35
2025/07/20 18:38:37
Regular
escortinadriver

For fun - the 99 cent turbo manifold.

A long time ago I won an incorrectly listed ebay auction for a sr20 manifold and turbo for 99 cents. Fast forward a few years and instead of renovating the bathroom, I was cleaning the shed, and came across it on the shelf, dusted it off and set about making it fit the pinto. This was more a proof o..
5
2016/07/10 22:45:35
ratta tat tat

EFI- MK2 2L Escort with droptank

The time has come to start on my fuel system for the Turbo Pinto. There's a few ways this can be done and I want to keep it as simple as possible. The car will be used for street & strip so no hard cornering. At first the thought was to put a lift pump under the boot floor next to drop tank, fee..
7
2016/05/24 21:07:29
brendonr71

Turbo charging a zetec

I have a 2l 16v blacktop zetec in a locost clubman.What inlet manifold can I use if the standard one isn't up to the job?..
3
2015/08/16 17:42:34
escortinadriver

Exhaust Coatings / Heat treatment

Looking at getting my exhaust manifold and dump pipe heat treated. Prefer somewhere in Vic but happy to post out for the right job. Anyone done this or similar? Who did you use?Process/treatment?Cost?Durability?Effectiveness? Thanks, Shaun..
5
2013/09/30 18:04:33
ratta tat tat

Any reason why this wouldn't work?

I came across this the other night on ebay http://www.ebay.com.au/itm/121152417799?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649#ht_83wt_1255 Looks like a cheap way to set up the hot side for turbo. And would clear brake booster bracket?Any thoughts? Thanks..
1
2013/08/05 22:31:49
shannon

sprak plugs for a pinto turbo

i have a pinto 2l efi with turbo i ran the engine for the first time today and just didnt seem to get enough spark due to wet plugs, so i fitted the original 190cc sierra injectors with the same out come any suggestions to what plugs i should use???? cheers shannon..
2
2013/04/28 20:19:26
shannon

oil coming out of oil separator

again started my pinto efi turbo today finding a couple of oil leaks, the dip stick was also leaking from the top of the tube so i capped it so i could adjust the timing(tho still didnt get to finish the timing). i then found it to come out of the oil separator. is there any reason for this and is t..
2
2013/04/28 20:18:02
Ionix

Turbo oil feed and return

Guys I did ask a question about this years ago on the old forum and have since forgot the answer and can't find the old article. Where should I pump up my oil feed and return? I think from memory it was said to go from the oil pressure sender then the return to weld a bung into the sump. Am I reme..
1
2012/09/15 18:52:00
tybrown

Turbo Article in fast fours and rotors from years ago!

https://tbrown9.egnyte.com/h-s/20120821/f653ffb053594bed I found this this years ago and copied it, and then lost it... i was looking everywhere for it and i found it! hopefully the link works (i had to find a pdf hosting site) where has the add an attachment icon gone?? anyway if it isnt working le..
2
2012/08/22 11:01:53

1 2 3 - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account