General Escort Discussions

To Bottom

General Escort Discussions (p.17)
Post New Thread
Regular
Dawleymon

mk1 heater not working

Hi all, just stripping out mk1 for paint, heater doesnt work, fan runs fine, any ideas before i strip it all out. Flushed cooling system etc few times but no luck..
4
2012/04/22 07:53:44
Dawleymon

Mk1 child seat mounting

Hi all Want to fit childrens car seat (maybe 2) in back of my mk1. There is pre drilled holes on rear shelf panel central to the rear seatbelts, has anyone else used these for fixing the anchor point? Would happily take it some where to have done right, but if its just a case of using the excisti..
3
2012/04/21 06:15:35
eamonlad

engine mounts

hi, can i use my 2.0 pinto engine mounts on my 1.6 xflow engine, and is the xflow mounts different thickness each side 35mm on one side and 50mm on the other, cheers..
2
2012/03/28 22:12:45
Graham

2ltr into 1600 van, Help

Hi I have put a deposit on a 2ltr engine from an escort and im looking to put it in my 1600 mk2 "work van". Just wondering if i got it at a fair price. It is a 2 litre with twin side draught Dellorto carburettors , correctly choked and jetted , on a short "Red - Line" inlet manifold , with sports..
6
2012/03/10 21:13:36
Forte

MK 2 escort gearbox/console

G'day guys, does anyone have any photos of the console with gearstick and handbreak using the T9 gearbox? Wouldn't mind seeing the final product, as i'm currently doing this conversion myself. Also, has anyone not lowered the T9 and just fab'ed up the new shifter hole and tunnel so to keep the gearb..
4
2012/01/23 09:04:39
RSman4ever

personalised plates

Hi can anyone tell me what colour combinations(numbers,background) were used in NSW during the mid 70's thanks Brad..
3
2012/01/11 21:14:25
gippsesky

MK1 2dr Resto/build queries/help

Hello all, I have just joined and hoped that someone can assit with some info I am after? - 5spd gearbox conversion: T9, T50 or W50. I like the idea of keeping all Ford, but don't like the mods req'd to the body to fit it. The ratios in the W50 look good, but I don't know how hard it is to source an..
3
2011/11/17 20:54:44
shepv8

Mk2 RS2000 parts identity

Hi all, Im in the early stages of restoring my 4 door RS and am tracking down parts. My issue is that a lot of parts I am getting from the UK and they call their parts by some names I dont know eg what is the gearbox in my car known as, I know its just a standard box with a short throw shifter but t..
6
2011/11/03 18:54:33
shaunb

Gold Coast khanacross

Gold Coast Tweed Motorsport Club is holding a multi club khanacross this Sunday. Details are on the club website, or ring me on 0409279929 for details. If you have ever thought about actually getting out of the garage and competing, come along and have a look this weekend. There are usually a ..

2011/07/22 08:22:15
Dawleymon

Mk2 into mk1

Hi All Time for my mk2 to undergo a big transformation, shes a 1600 manual, was thinking of dropping her motor into my mk1 1300, my question is do i need to swap the box too or are they the same ?, will i need to source another diff/axle ?or use the mk2 one?..
6
2011/07/02 22:48:20

<< ..16 17 18 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account