Help... URGENT!

To Bottom

Help... URGENT! (p.97)
Post New Thread
Regular
gtv6capri

Anyone coming to SFS from Mildura (or nearby)

A small ford lover fom Mildura bought a few parts from me, he lives in Mildura which is not normally a problem but there are 2 sill strips included which are about 1.6mt lond and cant be posted. They are also a bit delicate for a courier truck. If anyone is coming down to Small Ford Sunday in a few ..
1
2011/01/15 22:43:23
jorgan92

4 door mark 1 bubble arches?

I was looking at a mark one 4 door because it looks like its cheap enough, but I realized that the only reason I want a mark 1 is those massive bubble arches, is it possible on a 4 door, or am I wasting my time?..
4
2011/01/15 11:43:40
fpv_escort

pre crossflow port measurements

Hi All I have just purchased twin 1/14" SU's and they have what looks like to be a pre crossflow manifold on them. I was was just wondering if someone could measure the distance between ports number 2-3. Then hopefully I can sell them and get rid of them out of the shed!! Any help would b..
2
2011/01/14 13:29:11
RS 2000

WTB MK2 Escort Steering coupling

Hi I am chasing a standard Mk2 Escort steering coupling, condition not important.It does have to be the short type.If anyone has one for sale or maybe knows someone that might have one let me know. Cheers..
2
2011/01/12 22:42:49
Matt75

Cam setup question

Hi guys, Have just bolted the head back on the block and done everything up nice and tight and it occurred to me I cant remember what position I had the cam in before I took off the old head. Looking from the front of the engine, pistons 1 & 3 are at their highest point in the block and I have..
7
2011/01/12 17:45:21
viskoe

World Cup Xmember install

Is this right ?? Or do I have it the wrong way around?? Thansks Em http://i5.photobucket.com/albums/y151/viskoe/enginemount.jpg..
21
2011/01/12 07:00:48
Diablo69

MKII RS gear stick

Does anyone have a MKII RS gear stick for a 4 speed they would like to part with? Cheers Andrew..
1
2011/01/11 00:48:19
luigi

photo help

Hy guys what program u guys using HELP kevin emil martin anybody..
9
2011/01/10 19:26:43
Neale

Lowering Mk2 Cortina

Hi everyone, Just wanted to know how far is the lowest practical/legal ride hight & the best way to do it cheaply for a cortina mk2. I was thinking about 3 inches (75mm) But can you go further..
7
2011/01/10 14:45:59
somers181

Motor Rebuild

Hi everyone, Listing request here as i need to know of anyone in Sydney that can do a rebuild of a 1500GT pre-crossflow motor presently in a 1964 Consul Capri??? I want to keep it as original as possible but would also like to install electronic ignition at the same time, car has already been ..
2
2011/01/09 21:01:06

<< ..97 98 99 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account