Help... URGENT!

To Bottom

Help... URGENT! (p.86)
Post New Thread
Regular
viskoe

aligning engine in engine bay

Hi, what is the process for locating the engine in the engine bay. I dont trust my mounts etc cant seem to get it right. Does the 2 L sit along the cars center line or is it off set ? i am thinking of setting the engine and rewelding the mounts so that it sits correctly. What do people do w..
2
2011/04/18 22:00:19
BrandonC

Reverse light switch??

Hey guys just got my 4spd box back from reco, and they guys at the box place threw in a reverse light switch, all it is, is the bit that screws in then speratly the wire bit with the little circle metal inside the boot.. how does this attact to the actual switch?? Sorry if it makes no sense, ill ema..

2011/04/18 18:16:47
smallvan

rubber bit

I'm after the rubber boot that fits on the clutch lever, where it comes out of the mk2 gear box.Any ideas where i can get one,also what holds the speedo cable in the g/box Regards James..
6
2011/04/18 14:33:17
smiley_666

elec help please

Hi, im having a problem with my mk2 2L. It seems to be missing higher up in the revs (4k upwards) and it seems to get worse when there is something else on, such as the indicators. Its quite funny being able to time the misses to the indicators. The alternator is not all that flash, but it has a..
5
2011/04/17 10:14:21
razzle308

Re-packable mufflers any good?

Any one know if these are good, bad or ugly. It's a SS repackable muffler. Thought i'd get comments before i click BUY. Getting tramp kit and strut tops at same time. http://www.burtonpower.com/parts-by-fitment-type/parts-by-car-model-ford/ford-escort/exesc1.html Thanks...
5
2011/04/14 14:49:25
razzle308

Coil over rust prevention?

Hi all. Having just prepared my struts for coil over and recieved the kit. I have a question. When i weld the sleeve onto the strut there will be at least a margin of bare metal on the strut under the sleeve where the weld is. How do i stop this from rusting in the future? I thought of leaving ..
6
2011/04/13 17:32:08
BrandonC

Pedal box clip thingo for cable?? Needed asap.

Hey guys, im doing a manual conversion and iv got everything apart from the little clip thingo or whatever it is that the clutch cable connects to on the pedal box. Its pretty urgent. Thanks...
1
2011/04/12 22:40:01
fastphil

Mk2 dash pad recover

Does anyone know how can do the vac-bag recovering of my Mk2 dash? It also needs a few crack repairs in the under-foam!..
2
2011/04/12 20:50:28
hak073

Condensor screw...

Does anyone know what size it is, on a 1300 with Lucas gear? And also, if the one that used to be on there has fallen down the dizzy, is that a problem? I really should just stop playing with these things..
12
2011/04/12 14:30:33
camo91

making space in my engine bay.. Ideas?

What are everyones tricks to hide/ remove things and free up some space in the engine bay and still make everything legal...
7
2011/04/12 13:24:06

<< ..85 86 87 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account