Help... URGENT!

To Bottom

Help... URGENT! (p.76)
Post New Thread
Regular
BrandonC

More oil pressure???

I read on a site that adding a 6.25mm spacer in-between the release valve on the oil pump on a 1600 that it add 15psi more oil pressure? Is this true and what are the benefits of having more oil pressure? Thanks, Brandon...
2
2011/07/17 20:04:15
BrandonC

What will a std rebuilt 4speed hold up to?

hey guys just wondering if anyone knows roughly how much hp a single rail 4speed will take before things go bang. Its freshly rebuilt, say about 500kms ago. All std replacment parts though, no work. Cheers, Brandon...
12
2011/07/16 12:09:07
Mark1 Escy

Gearbox help

Hey guys, I was after some help/opinions. FYI i have a pinto with a w50 celica gearbox. A few months ago my car poo'd itself, it felt like you couldnt push the clutch in far enough to be able to change gears effectively. So we took it all apart and found a f'd release bearing, the mount had dete..
2
2011/07/14 12:56:08
ratta tat tat

Kent cams, best prices??

Hey fellas, I'm chasing a Kent (KC234K) cam kit. Any ideas where to find Kent cams for a good price? Burton have em for $360AUD excl shipping. How much would they charge to ship to Aust? Any dealers in the US? Thanks..
1
2011/07/11 00:03:09
krt10

fuel pump

hello lads. im after a stock fuelpump for a xflow kent engine asap. my fuel pump is leaking, rather bad. its making me nervous after having this happen to a previous esky due to a fuel leak..... id rather not go thu it again if possible http://i217.photobucket.com/albums/cc232/eskyman44/Photo..
2
2011/07/10 13:57:17
pottergt

Cortina TE seats , same as MK 2 Escort ?

Hi Guys , I have the chance of picking up some TE cortina seats that are in good nick with the perforated tan trim , my question is are they the same as MK 2 Escort .I know the runners etc may differ but the seats look very similar from the pics I have been sent Any help appreciated Cheers Craig ..
2
2011/07/10 11:17:16
timboss

Trace VIN Number through Ford

Hi All, Myself, Dad and my brother are looking to buy a classic Ford to do a bit of racing and club events in. We have found a few suitable cars, however none of them have the compliance plate still attached, which is important to us because we also want to register the car for road use. An enginee..
6
2011/07/09 17:39:43
BrandonC

Another question :)

Hey guys just wondering, iv got an oil catch can to go in, so the hose from the pcv valve and rocker cover go to it. then that leaves me with just the brake booster hose going to a 3 peice thingo that screws into the manifold. iv already got a hose on one with a screw in it and i dont want to do tha..
7
2011/07/08 14:55:59
Brett

Twin Webers Certified in NSW?

I was wondering if anyone has had their twin webers engineer certified in NSW? The car in question is a 1980 mk2 escort. I spoke to an engineer and he told me I need to: 1) Get an IM240 emmissions test (this is free at Penrith RTA testing facility) 2) Pass a drive by noise test (to test inductio..
17
2011/07/06 19:55:11
David W

Does anyone live near Mt Wavereley

I'm currently looking for some wheels on Ebay (non Escort) and they are 'pick up' only. Seller not interested in delivering to depot. I am asking if anyone who lives in the area would be prepared to pick them up. I'd have to deposit money into your bank account as he wants COD. You'd then need to..
3
2011/07/04 19:57:07

<< ..76 77 78 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account