Help... URGENT!

To Bottom

Help... URGENT! (p.67)
Post New Thread
Regular
Mickos

Caster issue

Hi all, my 79 mk2 Escort is nearly on the road but i have a large caster issue ( splayed bad ). As you most of you know there is no adjustment for this on a lot of eskies but do any of you have a line on a caster kit or know of a company that makes them? I have been looking at adjustable control arm..
10
2011/10/13 09:03:24
razzle308

Help - Engine mount bracket needed. - Resolved

Hi All. Organising putting in the engine and realised i had not tracked down that engine mount bracket i need. I have it sitting in there on a dodgy one of some sort at mo but need to get the crane back. Does any one have one i could quickly get my hands on please? (2.0 Mk2 1980) I have the mounts w..
4
2011/10/12 17:19:25
razzle308

Return hose needed??

Hi All. Hey i have a 80 MK2. It has a fuel return hose. I have fitted twin sidedrafts and a 320 LPH fuel pump. A friend who is a mechanic and races, says to do away with the fuel return hose. But i can't get my head around the pump tring to push fuel against the lines when the seats are shut. (ful..
2
2011/10/12 12:01:02
Paul

Mk2 escort drop tank 2L sender with return line needed.

I have a 1.6L drop tank it doesnt have a return line in the sender unit which i now need for my efi project. Does anyone have one that they could spare me or any other ideas? Thanks.....
2
2011/10/12 00:15:36
razzle308

Where does the temperature sender go?? Solved

Hi. Stupid question i nkow. Been a long time since i have played with my motor. I can't see where the temp sender goes. Neither of my manuals shows it and for all the googling i can find a pic either. Can anyone tell me and or send a pic. Thanks...
4
2011/10/11 00:59:22
Matt75

FEMA MIG Welder on eBay. Any good?

Hi Guys, I have decided to strip the car as I have afound quite a bit of rust and am in need of a mig welder. I have seen one on eBay that seems to fit the bill and was after peoples comments on whether it would be suitable for panel repair. My budget is around $750 so I don't want to go nuts. I wan..
5
2011/10/10 09:58:42
blackxt

14 inch rims for escort

im chasing a set of stock steel 14inch rims for a escort mrk2 could eny one steer me in the right derection as to from what kind of car will fit , thanks nathan..
5
2011/10/10 08:39:40
robertverhey

Need some brake pipes made up pronto in Sydney

Hello can anyone suggest someone who can make up some brake pipes in Sydney, preferably close to Five Dock, Strathfield or Silverwater, that sort of vicinity? I snapped one off near master cylinder when removing on weekend and my usual brake guy can't do: he sold off all his gear. Robert..
7
2011/10/05 21:47:27
fordsy

Hazard light switch in Mk2 Escort

Hi All. I have an L model 77 escort and it doesn't have a hazard light switch. I've only owned GL and Ghia versions so was wondering if the hazard light Switch was an option. There's no cigarette lighter or heated rear windscreen either. In fact, the only optional extra the car has is an AM radio..
1
2011/10/04 21:25:54
hak073

Mk1 Oil Cooler mounting

Not urgent, but I'm wondering how other people have mounted their oil coolers in a mk1 Escort. This is the cooler I've got, with the fancy brackets I've made up. http://hak.gwc134.net/Cars/Bandit/20110929_oil_cooler_2.jpg I was looking at putting it vertically on the drivers side like the followi..
2
2011/10/01 07:56:37

<< ..67 68 69 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account