Help... URGENT!

To Bottom

Help... URGENT! (p.60)
Post New Thread
Regular
Luke

Cosworth 2wd manifold joint bolts?

Its a long shot, but does anyone have a set of the double hex bolts to join the 2 sections of the 2wd manifold?..
3
2012/02/06 21:47:35
Andrew

Zetec Retro-Ford Sump - What Starter?

As the topic says.. what starter am I mean to use with a Retro Ford sump / zetec? The spaced pinto one i use hits the sump; looks like by 5mm (so more than can be ground off the starter). The escort starter cleared the modified CVH sump I had previously, buy I wanted some extra capacity so bought th..
5
2012/02/06 14:05:59
sundowner

chasing a good condition escort mk1 2door or panelvan door quarter glass drivers side.

Anyone got a drivers door quarter glass they dont need in good nic, mine is shot and in need of replacing? Glenn..
2
2012/02/06 10:34:35
ratta tat tat

standard capri struts

So a pair of these went on ebay several days ago for $51 They were in Vic so I didn't bid. http://www.ebay.com.au/itm/190632983197?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 When will a pair pop up in brisbane? I see ebay UK has them with coilover kits for about $600 delivered which make..
1
2012/02/05 23:25:34
robertverhey

Transporting car from Melbourne to Sydney

G'day all Just wondering if anyone has any contacts who can transport a Cortina Mk 2 from Coburg (Melbourne) to Sydney for a reasonable price? Car is a roller with brakes, doesn't start Robert..

2012/02/05 12:59:52
hak073

Electronic Ignition Wiring Help - Car Wont Start

I've just replaced the brake booster on the mk1, and of course now its all back together it won't start. I did have to take the ignition module (its got electronic ignition) off the side of the engine bay to get the booster off and then on again. The only thing I can think it might be is the wire t..
4
2012/02/03 13:49:08
hrt2c2000

Exhaust

What size exhaust should I put on my tc ford cortina it has a fully worked 2ltr pinto engine and extractors and what mufflers or how many mufflers I want it to sound nice..
1
2012/02/02 13:16:50
hrt2c2000

gilmer drive

hi where can i get a gilmer drive kit for a 2ltr pinto engine new or used plsss..
1
2012/02/01 11:58:53
razzle308

Straight through exhaust??

Hi All. Just wondering. I would like to run a straght through exhaust. (2.0+, big bore extractors. 2 1/2 system.) Given it is a street car i have to worry about noise. My question is - will 2 straight through mufflers lowwer the noise enogh to get me by. Obviously when i tramp it it will shout ..
18
2012/02/01 01:30:24
sundowner

GAZ CAPRI STRUT INSERT, MEASUREMENT FROM BOTTOM OF THREAD TO COLLAR SHELF ON INSERT

Can anyone help me as my Gaz inserts are already in my car, im just wanting too know what the distance from the bottom of the thread at the top of the insert is too the shelf of which the strut top sits on, does anyone have some they are yet too set up that they can assist me with, Cheers Glenn..

2012/01/31 21:35:16

<< ..58 59 60 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account