Help... URGENT!

To Bottom

Help... URGENT! (p.59)
Post New Thread
Regular
sundowner

sr20 inlet manifold on a pinto

i herd there may have been a thread on this somewhere, can anyone link me too it? cheers..
7
2012/02/22 13:13:38
Monaroman68

urgent need wheel cyl

chasing a wheel cylinder for a 1300 rear . need overnight if possible ring me on 41287384 Cheers Dave..
5
2012/02/15 23:54:45
ratta tat tat

Top spring cup damage

It's been a common problem with all the struts I've pulled apart. The top spring cup is damaged where the shaft passes through it. The straight sides get reamed out making it round so the shaft doesn't locate. I was thinking of taking the cups to a fabricator to get some metal put back into the hole..
2
2012/02/15 12:06:54
sundowner

escort van rear bumperette images

can someone please post some pics up of there rear escort bumperettes and how they mount to the car. cheers Glenn..
5
2012/02/14 08:53:15
razzle308

Twin side draught manifold - Bridge or not to bridge??

That is the question. I've read so much stuff about it i don't know what to do. I no longer have a booster - so no vacuum to worry about. I am going to run a catch can - so no PCV to worry about. So.... do i bridge the ports between the two inlets on each carby or should i block them of so each ..
5
2012/02/12 23:46:16
Paul Dunstan

Simmons wheels - rim bolts

Hi All I have been researching options for the 20 rim bolts on each of my V4 Simmons wheels. What is the correct bolts - I'm assuming being Aussie it's M8 (and not 5/16) but the heads on these appear to be slightly too big and are a VERY tight fit in the wheel centre. BBS etc use M7 which is an o..
8
2012/02/12 17:47:09
SteveDerry

Escort parts

Hey guys. Looking for best place to buy new 2l radiator, and will need to put in one of them cut out panels.and got the car resprayed so gonna be a nightmare. Also can I use the 1.6 loom which was in the car. Used to be a 1.6 but putting in pinto and twin 40/45 carbs. Also has anyone ever purchased ..
1
2012/02/11 17:15:43
Mickos321

Wanted Escort shifter parts.

Hi everyone, I am fairly new around here but was hoping someone could help me in a spot of bother. I am in need of the plastic part that holds the gear stick into the gearbox, the two other pieces (the screw in part and the on shifter part) are intact but the centre piece has desintegrated. Ebay, ..
4
2012/02/09 15:27:55
hendo

Looking for an Escort bonnet spring

I need a new bonnet spring that goes in the radiator/slam panel. As No 40 in the picture. Anyone got a spare or know where I can get one?..
2
2012/02/08 20:27:59
Luke

Cosworth 2wd manifold joint bolts?

Its a long shot, but does anyone have a set of the double hex bolts to join the 2 sections of the 2wd manifold?..
3
2012/02/06 21:47:35

<< ..58 59 60 .. - Powered by APG vNext Trial

© 2026 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account