Help... URGENT!

To Bottom

Help... URGENT! (p.53)
Post New Thread
Regular
mk1escort73

whats standard front strut insert diameter

just after replacing strut tops to roller bearing type (from grp4) the bearings are 20mm is this the same as standard??? brad..

2012/05/31 17:04:59
Jaycees

Escort Sundowner Numbers

I have been asked this week by Chris Underwood , the Motor Sports Compare for Hawkesbury Radio how many Ford Escort Sundowner's work built , Is there any one with this knowledge out there ? Jim..

2012/05/30 19:54:54
svenoeger

Wanted! Xflow 1300 or 1600

Hi everyone, Need a working flow 1300 or 1600 (preferred) motor in the melbourne area... Need it in and running before cortina nationals! Cheers, Alex..

2012/05/30 09:00:42
ari

Alloy arches

Can someone please advise me the difference between Tarmac/forest/Monte Carlo & Boreham arches. I am aware that some (rears) are above swage line & some below but where do Boreham arches fit into this? Width of all types would also be appreciated...

2012/05/27 14:48:53
ratta tat tat

pinto starter motors

which type of starter is used on a capri pinto with manual transmission ? Can Lucas escort starters be used? eg: 9 tooth inertia or 11 tooth pre engaged. Thanks..

2012/05/25 23:34:53
RS 2000

Sr20 to escort speedo

Hi, Who has standard escort speedo connected to sr20 gearbox and working correctly?? If someone has this working I would like to hear from you. what speedo drive in the gearbox was used? and what cable?custom I guess. any help would be appreciated as I need a working speedo asap, as part of my engi..
1
2012/05/24 11:09:36
jpayne

Damn forum memory

Damn forum wont remember my log-in details have to request reset everytime and its wearing thin, has been happening for over a year and has led me to not try and log in... any advice also happens on 4 different computers in two countries on opposite sides of the world Justin..
1
2012/05/23 18:17:01
smallvan

Electric choke setup

I just bought a weber 32/36 carb,it has a electric choke how do i hook that up so it works.Can i put it to the temp sender or do i have to put a switch in and turn it on/off manually..
2
2012/05/23 17:10:43
ratta tat tat

Lend of some weber jets??

Hey fellas I'm trying to get my crossflow running perfect, at the moment it's a tiny bit on the lean side. I was hoping someone out there wouldn't mind lending me some jets (preferably a pair of 50F8 and a pair of 140 mains to suit a 40dcoe) so I can tell if they'll suffice then order from weber per..
3
2012/05/18 22:25:52
razzle308

I need bolt for alternator please.

Does anyone have any alternator mounting hardware spare?? I need the bolt and fixings that hold the altenator in place. I seem to be missing mine and my DIY has the alt on an anlge when belted :-( I have the alt the mounting bracket and the adjustment bracket. Just need the other hardware. Tha..
2
2012/05/18 13:33:42

<< ..52 53 54 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account