Help... URGENT!

To Bottom

Help... URGENT! (p.45)
Post New Thread
Regular
John william Hadden

Help

Looking for help Can any one help me I am trying to find copies of Racing car news period late 71 through to mid 72 . Any thing to do with the John Basset Globe escort particularly Calder Feb/ March 72 Any help would appreciated thanks you in advance John..
1
2012/08/30 12:15:19
hellozaizai

Accent WHERE TO ATTACH DIAGNOSTIC TOOL

Ford MK3 my engine check light stays on, blinks, car stalls then same thing until warmed up. when i put it in gear it just sits there, about five minutes until warmed up, and doesn't shift easily when going uphill (automatic trans). where do i attach the diagnostic tool to check the problem(s)? What..

2012/08/28 18:54:30
razzle308

Black door handles wanted.

Anyone got some black internal door handles/armrests in good nick at a budget price. I got a set of front ones but there not that great and i need rears so i don't have to do the dodgy and paint my tan ones :-P Thanks...
13
2012/08/28 18:23:45
gtv6capri

Strut Insert nuts HELP (may require fitter and turner)

I have a pair of Pedders Comfort Gas strut inserts nicely fitted to my strut bodies ready for re-assembly, that is until we went to fit the top nut. They are odd, very fine thread nothing like any other struts we have to compare. 3 hours of searching tells me they are 7/16 UNEF (28 threads per inch,..
7
2012/08/28 14:10:37
obsesscort

1.6 - 2.0L pinto - fuel line relocation

Hey guys, With the standard 1.6, their seem to be two fuel lines, one running down the driver chassis rail (i'm guessing the feed?) and one running down the passenger chassis rail (return line?)... Can someone provide an explanation of the two lines and their purpose? For people who have done this c..
12
2012/08/27 21:38:23
Jaycees

Mk1 & Mk2 Escort Pedal Box

For a Manual I am about to "try" and fit a Mk2 Pedal assembly in a Mk1, Now of the angles of the pedal housings are different and the brake arm hole appears in a altered position, Is there any one with advise on what is easier and what it does to the final point to where the pedals sit to the flo..
4
2012/08/26 18:32:11
duntish

Heater bubble removal

Hi all, I'm trying to remove the heater bubble and vent above it from a mk 2 escort. I've drilled out all the spot welds I can see but cant get the thing to budge. Any advice on what to do next would be appreciated. thanks, Neil..
2
2012/08/25 06:32:10
PeterM

Mk2 Escort 4 Link Coil Over Rear Suspension.

Hi All, Re Mk2 Escort: Has anyone developed an adjustable cantered/triangular 4 link rear suspension with adjustable coil over, and completely bolt in without modifications to the bodyshell? Just pondering ideas at the moment. If someone has done it I would like to compare notes. ta, peter...
1
2012/08/24 21:44:11
obsesscort

A couple of rookie queries

Hey guys, Firstly, I've got these extractor gaskets that i can't seem to figure out (see photo 1 below). http://i104.photobucket.com/albums/m196/draneman/IMAG0684.jpg They only seem to fit with two of them with the metallic side facing the block, and two with the metallic side facing the extractor..
9
2012/08/23 21:21:28
mattsmithadelaide

Ford escort Diff brake and suspension upgrade

Hi All, I'm a newbie who just recently purchased a 1600cc 2 door ford escort with a 2L pinto put in it. The car isn't in great condition and there is plenty of love needed. At the moment: NO rear drum brake assembly NO rear shock absorbers I was told the diff needed some attention (which means..
10
2012/08/22 13:46:16

<< ..43 44 45 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account