Help... URGENT!

To Bottom

Help... URGENT! (p.44)
Post New Thread
Regular
obsesscort

Pistons fouling on valves

Would you be able to hear it? I've noticed my belts slipped a few teeth due to lack of tension..... Haven't had the engine running yet, just turning over. I have retimed the pulleys and tensioned the belt since... I'm a little bit scared...
7
2012/09/12 19:14:17
obsesscort

pinto firing order???

Can someone please let me know, can't for the life of me find it in the book and i'm guessing its different to the kent!..
4
2012/09/12 16:05:55
obsesscort

Starter motor wiring

Hey guys, just connecting up the starter motor on my 2.0L and having a few uncertainties. I've studies some other threads such as this http://www.classic-ford.org/cfp/tm.aspx?m=46738&high=engine+bay but i'm still unsure of whats required??? I've got a couple of pictures of the top and bottom of ..
9
2012/09/11 22:47:51
razzle308

Hi beam - flash working, constant not. ??

Hi all. I have a prob with Hi beam. I thought before i spend hours chasing i would see if anyone else came accross it. I can flash my high beem ok but in the constant on position - nothing. (so bulbs are ok) I have swapped switches and it still happens so it's not the switch. Any ideas?? Thanks...
12
2012/09/10 13:58:06
joelz87

Soda blasting/Sand blasting Melbourne

Hi everyone, Had a painter look at my car and he has recommended that I have it soda/sand blasted Can anyone recommend me a company that is fair and reasonable in pricing Willing to travel, am located in Aspendale Cheers Joel..
5
2012/09/05 06:54:47
Timmk2

Mk2 Decals

Hi guys have done a bit of a search on the google but can't find any places that do the Mexico and rs stickers and stripes kits any help would be great thanks..
4
2012/09/03 19:48:23
BJ

Autometer Gauges

Can anyone recommend a good local retailer for Autometer gauges. I am going to build a new dash for the MK I and, frankly, the only local sellers I have found so far have a very limited range and are asking very high prices. Thanks..
2
2012/09/01 20:54:54
razzle308

Tie rod ends?? - again.

I know this is not a new subject but I haven't so far seen a solution that doesn't require a lot of mod. My 2L appears to be almost at the extent of its toe adjustment. I am not so happy about it hanging on by just a few threads. Maybe this is ok - Tell me if it is. I have extenders but when i a..
1
2012/08/31 09:16:08
obsesscort

oil pressure gauge

Hey guys, Where would you attach your electric oil pressure gauge on a 2.0L pinto?..
1
2012/08/31 07:55:17
Mish

lowering block dimensions

hey guys just wondering if anyone had a set of lowering block sitting around for an escort that they could messure up for me need to know width, length, pin size and height/depth want to run inch blocks in my escort but have a borgwarner diff so need different U bolts and not sure if i can get inch..
4
2012/08/30 19:00:00

<< ..43 44 45 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account