Help... URGENT!

To Bottom

Help... URGENT! (p.4)
Post New Thread
Regular
PeterM

EFI Fuel System

Hi All, I am converting a Mk2 2 litre Escort to turbo charged with modern EFI however wish to retain the standard under boot floor fuel tank. The car will be a reliable quick street car. No track work.I do not wish to cut large holes in the body shell. Can anyone suggest best design and layout and p..
46
2019/09/02 23:28:11
Suttonmotorsport

Rx8 clutch master cylinder bore size

Can someone please advise the bore size of the Mazda RX8 clutch master cylinder? Thanks Craig..
3
2019/07/19 18:50:50
Drewdog

Mk1 Cortina steering box wanted

G'day all,Looking for a Mk1 Cortina steering box and column to suit 65/66 airflow (theres a difference in column length between early and late cars I'm lead to believe)Whilst pulling mine apart I've realised I have a Mk2 unit with no mount for the handbrake relay and a longer link arm.Any help appre..

2019/06/30 18:07:37
GYRO

ignition wiring 2l mk2

Gday guys, I have a 79 mk2 2l. Fitted a zetec and now need to sort engine and ignition wiring. The starter had three wires going to it, the large positive connector and two red wires, one with a green tracer and one with a blue tracer. what are these for. Also there is a pink wire with blue tracer a..
2
2019/06/02 19:35:01
BEE VEE

FAN BELT SIZE OR P/N FOR 1988 ESCORT PLEASE ?

Hi all have a query from an interstater who wants a fanbelt on his Escort Mk2 Panel van 1988 Guessing its an import as I thought 1977 was the latest in OZ. His regio papers show a 1594cc engine so 1300 would be right. Eng/Chassis says CK50XC92669A Any help appreciated..
2
2019/05/10 17:02:41
gtv6capri

Anyone in Perth up for a cashie?

Hi all, I have located some wheels I want to buy in Perth. They have old tyres fitted and the seller is not wanting to either strip the tyres or box up the wheels. This makes freighting back to Melbourne awkward. Is anyone interested in collecting them and either consoloidating with a car/other frei..
1
2019/02/25 01:57:51
BigAl

gearbox speedo drive

Can anyone tell how to change the gearbox speedo drive cog? I have a 1600 gearbox and a 2 litre diff and I want to change it so that the speedo reads the correct speed. It's annoying with the speedo wrong. Cheers, Big Al..
11
2019/02/22 13:26:15
escortinadriver

posting picture in threads

Is there a simple way to post pictures in the middle of threads without 3rd party hosting or can you only link pictures as thumbnails at the end. I have a few pics for a new thread but since photobucket held everyone to ransom I have yet to upload them anywhere..... Thanks, Shaun...
7
2019/02/10 17:31:33
GYRO

Clutch Release Bearing.

Gday Guys, In the haynes manual it says the clutch release brg is in constant contact with the clutch fingers. Is this correct as I thought this would cause premature brg wear. rgds Gyro...
2
2019/02/06 17:31:57
BootOn

Mounting hard fuel lines

Hi I’m at a point where I need to run fuel flow and return hard lines the length of the car for an EFI conversion, I don’t want to run through the passenger compartment so the most logical place to run is along side the drivers side chassis rail. I’m reluctant to drill the chassis rail or floor pan ..
6
2018/12/03 20:45:02

<< ..4 5 6 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account