Help... URGENT!

To Bottom

Help... URGENT! (p.38)
Post New Thread
Regular
Matt75

Help Wanted - Bleeding Brakes

Hi Guys, I have tried bleeding the brakes a number of times and get a nice hard pedal once done but when I come back in 5 mins or so the pedal will sink down and will become hard again once pumped a couple of times. I have bled the brakes, both back and front, about 3 times as well as the M/C now an..
10
2012/11/22 21:25:54
razzle308

What jet sizes? 2x 40 dcoe

Sorry to repost but there were no replies. My mechanic friend say im lean. I and the air/fuel gauge say rich. so...... what do you guy's run? pleeeaaaassse?? Hey all. Did mine by the book and runs like a pig. Worked 2L pinto. (cam - 60 deg ovelap split, 0.47 thou lift, ported, large valves,) Twi..
24
2012/11/22 01:45:15
Diablo69

Oil line leak behind dash

I have a slight oil leak in the RS behind the Dash. Enough that it drips a few times a day onto the floor. Does anyone have a good fix for this? Cheers Andrew..
5
2012/11/21 19:48:28
the_cheese

Sealing up tappet covers (particularly kent)

I've had some problems getting the tappet cover on my kent engine to do its friggin job! I replaced the cork gasket to find it was still pissing out oil. After a couple of weeks it stopped leaking funnily enough and all was ok... until the other day when I adjusted my valve clearances and decided to..
9
2012/11/20 18:05:08
lucas

Mk2 cortina shocks!!! Can't find any!!

Where do people buy there shocks from (all 4) cause every shop I have called repco Monroe pedders etc.etc have said there discontinued and can't tell me anything else that will fit. Any help would be great Thanks..
8
2012/11/18 19:41:55
razzle308

Nearly had a fire.

Hi all. That was close one. Went around the block last night to test some jetting and for some inexplicable reason smoke started spewing out of my console. That really freaked me out. NEVER LEAVE HOME WITHOUT A FIRE EXTINGUISHER!!!!!!!! U just never know. I didn't need it this time but damn tha..
8
2012/11/17 21:09:59
razzle308

Starting issues - electrical.

Hi all. I am having ongoing starting issues. Some history: The battery was moved to the boot as one of my first mods. (1980's) It has a 10mm wire to the front. This has worked fine for many years. The starter motor has been rebuilt. It has a humongous battery. With the batt fully charged it cr..
23
2012/11/17 21:06:49
Flighter

Opinions on approach to resto wanted

Hi all, I'm about to get cracking on getting the body of my Escort up to snuff before having a full re-spray done. Whilst I hope to achieve a high standard, it won't be a show car or used on the track; just a nice street cruiser. I've spoken with some pros about the body work, and unsurprisingly hav..
16
2012/11/17 16:04:12
yan_83

Weber 32/36 DGAV issues

Hi All, Ok the story is, i have a Ford Escort Mk2 with a 2 litre Pinto and a Weber 32/36 DGAV carby, this engine is a fresh build and the carby is new, all this was done before i bought the car, the engine had not turned over either. Ok after troubleshooting many different issues the car finally kic..
7
2012/11/17 14:02:15
eamonlad

xflow runing rough

hey, took my car out for a run yesterday and after bout an hour it started running rough, it seems to start to run rough when it gets up to temp cause i took it out this morning and ran fine until it got up to temp.Its fine if you keep the revs up but if you come to a stop and go to take off again i..
4
2012/11/14 08:02:28

<< ..37 38 39 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account