Help... URGENT!

To Bottom

Help... URGENT! (p.30)
Post New Thread
Regular
krt10

help trying to find history on my mk2

hello guys, well as some may know i have a mk2 4 door with a sr20det.http://i217.photobucket.com/albums/cc232/eskyman44/esky1of1_zps629b234a.jpg well ive been going through the process of getting it engineered and regod in sa. yeasterday i had an ID check done on it and it all turned to S**t there w..
8
2013/06/16 18:48:20
stuart h

32/36 weber on a 1600 xflow running rough

Guys I have a 1600 in my khanacross bunky it's not standard but what cam it has I don't know? It's got a electronic ignition and a 32/36 weber off a pinto and it runs fine in 1st,idles fine revs fine but when changing up a gear it coughs and farts and goes nowhere it feels like i have changed from 1..

2013/06/10 14:49:14
yan_83

Carby mechanic Canberra

Can anyone recommend a good carby mechanic in Canberra? Thanks, Yan..
3
2013/06/06 17:41:28
razzle308

4 groove valve collets??

I am about to get a set of Ferrea valves. They don't have a listing for the pinto motor for the collets (keepers locks cotters)I can however specify angle.I cannot for all my searching find what the standard angle is?Does anyone know?Thanks.Darren...
5
2013/06/05 19:31:17
Mk2Brett

Mk2 Escort fuel guage not working

After filling up the tank on Saturday my fuel gauge stopped working and just reads zero, tested the wires coming from the fuel sender and the gauge moves up to full works so that still works. could it be the internal mechanism inside the fuel tank?..
5
2013/06/05 11:04:05
stevieg

Test Fuel Pump

How do you test if a fuel pump works of the car? Mk1 Escort 1600..
2
2013/06/04 13:53:18
nikmag2

ford anglia to buy or not to buy????????

http://i632.photobucket.com/albums/uu50/nikmagbucket/tas%20cars/Blackmansbay059_zps0200e07d.jpghttp://i632.photobucket.com/albums/uu50/nikmagbucket/tas%20cars/Blackmansbay058_zpsb380ebec.jpghttp://i632.photobucket.com/albums/uu50/nikmagbucket/tas%20cars/Blackmansbay057_zps0c857f21.jpghttp://i632.pho..
3
2013/05/29 22:37:02
razzle308

Newman phase 4 cam geometry

Hi all. Just getiing around to fitting the new camshaft which is a newman phase 4 and I am getting spring bind. Has anyone fitted this cam and what components did you use? Thanks. Darren...
25
2013/05/29 18:20:23
fpv_escort

Help Save Baskerville Raceway!!

https://www.youtube.com/watch?v=OVHlMfkPcWI..
3
2013/05/28 22:41:30
RS_Spurry

Front End 'Clunking'

Hey all, just wondering if any-one has some ideas on what may be causing the front end on my mk2 escort to 'clunk' over speed bumps etc. I've put a poly bush kit throughout and replaced the tie rod ends and control arms etc. I've also put new Gas shocks and King springs and replaced the strut tops w..
3
2013/05/20 22:29:19

<< ..28 29 30 .. - Powered by APG vNext Trial

© 2026 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account