Help... URGENT!

To Bottom

Help... URGENT! (p.27)
Post New Thread
Regular
sundowner

wanted MK2 escort drop tank sender lock ring

as the title suggests, im chasing just the locking ring for my sender in my fuel tank, I believe either a panel van or mk2 drop tank uses the lock ring, i realise the one in the pic is from a side tank but it was the only pic i could find, CheersGlenn..
5
2013/08/27 16:28:50
ozzycoz

Sundowner tank sender unit

Hi everyone, I'm after a replacement fuel tank sender for my Escort Sundowner. My van had been stood for over 10 years and after removing the very smelly stale fuel i then took out the sender and found it to be completely seized up and the wiring rotted away :-( If anyone has one that would fit..
1
2013/08/27 10:52:27
ratta tat tat

MK1 Escort drag coefficient?

Hi, I'm thinking about getting an Escort Passport GT2 accelerometer for my 1970 MK1 2 door sedan (super 1300) but need to find the drag coefficient. All I could find on google was a MK1 estate at around 48????Thanks..

2013/08/25 20:30:05
Jaycees

Who Can Help Find? Mk2 Escort Odd Mirror.

I Have dismantled "2" Mk2 Escorts 1975 & 1976 which had this type of interior mirror.I am chasing a mirror and housing replacement and am not having any luck.Has anyone got a good mirror or know what other Ford had this type?The section that screws up to the roof is like die castHas somebody on ..
2
2013/08/23 08:39:52
eamonlad

Engine builders adelaide

Hey, I'm looking to get some work done on my 1.6 xflow in adelaide, I.e some porting on head, pocket my pistons and a general check over, anywhere in adelaide is fine although I live south. Lonsdale engine works can't do it for months, and mike dale can't do anything for 4 to 5 weeks eit..
8
2013/08/16 23:18:00
RS_Spurry

escort 4 speed selector issue ?

hey guys, just having an issue with my RS 4 speed, selector all of a sudden went very sloppy feels like it dropped a spring or something ? managed to get it into second but that's about it. clutch seems fine. anyone had this happen before? don't really want to pull the gearbox out if I don&#..
3
2013/08/14 19:37:06
Jaycees

thrust race

I went to order a thrust race this morning for a ford 4speed,seeing that its going to a 2lt engine ,, I said for a mk2now they have come back and asked "is it for an RS2000" as they are different.so I checked out 3 thrust races I have here still on gearboxes and they are bigger facedwhat is right or..
4
2013/08/10 08:02:11
Matt75

Rally Design - Adjustable Track Control Arm Recall

Hi Guys, Just got a letter from Motorsport Tools saying that there has been a product recall on adjustable TCA's from Rally Design.I have attached the letter I received so please read it as to quote the letter - the machining fault "makes the adjuster very weak and failure is almost inevitable". The..
2
2013/08/06 18:34:49
krt10

advice on rear end

hello im just after opinions on what i could do to the rear end of my mk2 4 door. its currently running a series 2 mazda rx7 rear end. its got a 4.11 ratio,lsd and hardened axles. i like the setup but the problem is its too wide. from hub to hub its just a tad over 1450mm. this means i cant fit wide..
4
2013/08/05 09:20:03
ry4n13

pinto engine mounts to wcxm dont meet up

Hi im doing a 4 door mk2 escort up but run into a slight problem i rebuilt a 2.0 pinto engine to drop straight on to the wcxm i know the long mount goes to the drivers side and short to the passengers, the engine was from a sierra so still got the same sump which has been beaten in to fit problem is..

2013/08/04 18:10:08

<< ..25 26 27 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account