Help... URGENT!

To Bottom

Help... URGENT! (p.2)
Post New Thread
Regular
ratta tat tat

MK2 Escort intercooler fitment

Hi guys I have a pinto turbo going into MK2 Escort coupe. I want to use a high performance 2 row radiator core (brass & copper) , it's a Redback brand and they're reputed to be just as good as a triple row core. This will allow more room for the intercooler. I have done lots of measuring a..
8
2021/07/19 09:07:52
Flighter

Unknown heater box

Hi. Can anyone ID this heater box? I'd like to move it on to someone who could make better use of it. Thanks...
2
2021/04/17 18:46:36
Fatboy80

Mk1 rs2000

Hi like a donut forgot to take the tags off my shell before sending it to be bead blaster and they have miss placed in them the process can anyone help me i have managed to get a new chassis tag but thats it is there anyway of finding paint code and spec?..
4
2021/03/18 16:32:38
PrincessFiona

Escort Mk2 w. Crossflow Issue!!!

Having recently returned from the UK, I have been trying to get my Mk2 Escort up and running again after about six years of inactivity. Drained the fuel and cleaned the tank as it was putrid. Fuel line was also cleaned in this. Removed rocker cover and found a broken head bolt (wasn’t sure what the ..
9
2021/02/07 19:17:40
GYRO

2.0 zetec blacktop..

Gday fellow enthusiasts, my 2.0 blacktop engine cover has just developed a 100mm crack along the edge, about 5mm up from the gasket joint. No oil leak yet. Has anyone else experienced something like this. cheers Peter...
4
2020/12/09 20:46:52
Guest

WANTED to BUY Mk2 Escort Parts

Hi All,I am looking to buy the following Mk2 Escort parts22 mm front sway bar (RS2000)Rear sway bar (RS2000)2 litre radiatormanual 4 speed gearbox cross member.Any leads on where to get these parts would be greatly appreciated...
2
2020/11/20 19:12:54
Littlefezbomb

Engine help

Hi guys I have a mk1 fiesta 1.3gl iv owned the car 8 years but unfortunately its been sat in the garage for the last 3 and now im wanting to get it back up and running. Does anyone know of a good place in or around Sheffield/Chesterfield area that could get it going and possibly spruce it up /tune ..

2020/11/12 06:09:49
Paul Dunstan

Zetec Silvertop oil pump gears

Hi AllI pulled apart my oil pump to check the gears for wear etc and now a little confused.When I removed the backing plate I expected to see the inner and outer gears with markings indicating either face up or down and these to be on the same side (as per most OEM pumps of this design).However when..

2020/11/06 22:36:06
BEE VEE

1972 GT V6 MANUAL CAPRI REAR CONTROL ARM BUSHES

Hi Guys can anyone send me dimensions of the actual 4 Control Arm Bushes that sit in the 2 arms from Rear Axle Housing to Floor u/side please ?............... I believe 2 are different to the other 2 ? ........ As I have a lathe, and a ridiculous surplus of various assorted bushes, I'm hoping to mak..
3
2020/10/25 15:08:01
deano

anyone know Taz (?) engineering in Adelaide?

this might be a dumb question, but I've heard twice of a mob in Adelaide who are experienced in Duratec conversions or who many also do parts/engineering certification.All I know, its like Taz, Tas,TandS Engineering/Conversions/Automaotive ??? and they are somewhere in Adelaide. 4 nights of searchi..
2
2020/08/25 17:29:51

1 2 3 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account