Help... URGENT!

To Bottom

Help... URGENT! (p.18)
Post New Thread
Regular
SR_2000

blackouts on 2 door rs2000

can anyone help me with some pics of the blackouts on the mk2 rs2000 two door?? mainly around the quarter window to the plastic gutter trim and top of the door skin??cheersMatt..
1
2014/08/14 12:59:38
blackvr

Auto vs manual crankshafts

Is there any differences between the auto and manual 1600 crossflow crankshaft in a Mk1 Escort ? Specifically the back of the crank where the flexplate and flywheel bolt up ...
4
2014/08/13 09:26:14
viskoe

Front brakes stuck on

Arrgh , for some reason my front discs have locked on. It's like the master cylinder is not letting the fluid bleed back? It's a 2 l m cyl with one front port blocked off as I am using a tee piece to feed both discs . Could it be a problem in the master cylinder??? Tia..
10
2014/08/11 17:48:16
Flighter

Rally Design freight charges

I need a few bits and pieces and thought I'd give Rally Design a try seeing they have everything I need. They don't reveal shipping costs before orders are placed though, so can anybody shed any light on whether I'll get raped on the freight or not? Thanks...
10
2014/08/05 21:53:08
John william Hadden

WTB Atlas crown wheel carrier standard

HI All can anybody help a friend of mine has launched his carrier for an Atlas diff Regards John..
1
2014/07/28 15:45:54
jpayne

Adelaide machinist

Can anyone recommend a machinist engineer in the Adelaide region. I need a number of small parts modified made and discussed. Would prefer a competent backyard or hobbyist vs the big machine shops (read realistic pricing) Cheers Justin..
1
2014/07/19 19:28:30
viskoe

Refitting MK1 Escort windows

Hi all,I am eagerly waiting the arrival of my new window rubbers.I need to figure out what is the best way to fit the rubbers.Some people say to use soapy waterOthers say something like armourall.Should I use some Mastic sealant between the rubber and body ?Can/should the side windows go in without ..
3
2014/07/11 22:22:27
emmac

Pinion angle?

I'm trying to find out what the diff pinion angle was on both a V6 & a 4 cyl. Capri please.If any one can help it would be most appreciated.Thank you...
2
2014/07/10 00:30:41
jpayne

thread repair

Guys, Can I put a M12 helecoil into what was a 7/16 unf hole. One of the brake caliper threads on a pair of 2.8i bilstein struts is damaged and I don't think its repairable without helecoiling or similar. I believe it will be fine as after the new oversized hole is drilled there is non of the old..
4
2014/07/07 09:49:08
HighRevs

Mk1 Ignition Lock Drama

I was hoping my first post would be showing the metalwork getting done but I've run into problems with the ignition lock and need help identifying what replacement parts will and won't work. After 3 days and two locksmiths, I've given up trying to get a key cut for it, even after they drilled the si..
6
2014/07/05 18:09:52

<< ..16 17 18 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account