Help... URGENT!

To Bottom

Help... URGENT! (p.13)
Post New Thread
Regular
Cholaso

Really Bad Brakes

Gents, I have a bad brake issue apart from also needing a brake booster on my 2L Mk2. Given the unknown issues i drive really carefully cos in the wet (bare in mind i have bad tyres too) if i slam on the brakes the back end swings out anti clock wise. In the dry if i slam on the brakes i cant make t..
8
2015/11/06 08:47:56
Jason

Torque value for Front Hub nut using Stub Axle stiffeners / Bearing Spacers?

Hi,If anyone has experience with or is using stub axle stiffeners / bearing spacers in their front hubs, what torque settings have you used for the hub nut?The only info that came with the parts from the bearing spacer manufacturer/supplier says to do the nut up "full tight".I get what they mean, bu..
5
2015/09/21 19:14:35
Jason

Decent Machinist on Sunshine Coast

Hi,Could anyone recommend a decent Machinist on the Sunshine Coast, Qld. please?I need to have some bearing spacers/stub axle stiffeners fitted, as well as having the centrebore on my new front discs machined to fit the hub, plus re-drilling the disc to bolt it to the rear of the hub. I had some sim..
3
2015/09/21 12:23:11
Scott

Escort not used for 1.5 years.

Hey all. Here's the situation due to my situation of working/living overseas for some time my Escort has not been used for 1.5 years, what are some things I need to check on the car?I will be changing the engine oil, new oil filter, top up the gearbox oil, checking the brake fluid, replacing the bat..
15
2015/08/26 19:31:11
MATTJ

Mk2 boss kit lengths

Hi guys I've just got a quick release setup for my race car and I knew it would bring the steering wheel too close to me, I have a old short boss kit that's perfect length but the splines are too worn while the one on the race car is new but too long! Does anyone know by chance the lengths of ..
3
2015/08/12 08:14:28
jetmk2

Please help me find my first car !!!

Hi everyone ! My name is Josh and im currently looking around a few different avenues to see if anyone knows the where abouts of my first car or any info on it , It would be so greatly appreciated !! I originally bought and built the car in 2002-2003 when i was 17-18 , It was a 2-door mk2 ford escor..
13
2015/07/29 12:06:34
spanner

Kent alternator help

Whats a good replacement alternator to replace standard 37A Lucas found on 1600 Kent?chasing something around 65A. and will fit with little or no mods to standard bracket. thanksTim..
3
2015/07/15 11:45:36
marty

Chasing old info on here

Hi all, been some time since I've posted but I still use the great info and discussions on here. However I'm looking, without much success, for info that I think was posted many moons ago about fitting 4 link boxes that included measurements and starting points etc. my recall is getting more vague t..
4
2015/07/09 12:45:36
caprigt

Engine builder for 1600 Kent crossflow

Hi guys, I'm looking to get a 1600 Kent crossflow motor fully rebuilt to get the most hp I can out of it. I don't have the time to do it myself so I have been trying to find someone in Sydney to do the complete rebuild .... I was just wondering if I could get some suggestions/referrals of wh..
3
2015/07/03 07:24:44
SaggaRS

Help with coilover.

Can someone help me identify what these struts are for?The rotor guard on right is MKII RS 1980, but holes don't line up with strut.The axle thickness is bigger than standard too from memory.Will MKI or Capri fit better?M16 calipers match fine.Thanks in advance...
7
2015/06/30 22:55:48

<< ..13 14 15 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account