Help... URGENT!

To Bottom

Help... URGENT! (p.126)
Post New Thread
Regular
KIZZA

which cortina speedo cable for type 9 gearbox?

I'm going down to the wreckers Monday to get a speedo cable out of a TE Cortina as I have read on here that is the solution to the standard cable being abit short with a 5 speed. My question is which configuration of cortina do I want it from? (e.g 4 speed 6 clyinder, 4 speed 4 cylinder, auto?) Chee..
2
2010/02/13 18:04:35
Regs RS

Cam Bearings

Have had a pinto head at the engine shop since before Xmas,just getting it set up for unleaded,bit of port work & a cam kit fitted to run with my webers. Anyway when they went to fit the cam bearings they pretty much fell through,the holes where about 15 thou oversize The head was secondhand and had..
5
2010/02/13 11:04:16
oldcapriman

Jammed motor - 1600 Kent

Guys, I am after some of your thoughts. I have been talked into another resto project - a Capri that has been sitting for ? years. Not sure when the motor last ran but the fuel pump was just full of white powder & the oil filter was last changed in 1986. Anyway I can get the motor to turn over by h..
3
2010/02/10 14:02:14
Yannick

Carbon Cannister purge connection

Hi all, I own a Ford Escort Mk2 2 litre with a Weber carby. The carbon cannister i have is the non-EMAIL version. I am unsure where the purge connection goes to. Any help or pictures would be great. I have checked everywhere and cannot find where it would fit. Plus the connection at the bottom of..
9
2010/02/09 18:00:23
camo91

1600 power increase

Hi fella's, i have a 1600 kent with extractors 2 1/4 pipe and a 32/26 two stand carby. what can i do to the engine to get the most power out of what i have or could get, i dont want to spend heaps on it, because im going to be pulling it out in about a year and putting in a ba falcon straight six..
12
2010/02/09 15:14:09
whoppa

fuel lines

hey guys ive takin mt webbers off to fix the manifold and in the mean time ive mounted my fuel presure reg with guage and i went to put the webbers on and its in the way haha... heaps spuewin... and i dont wanna move it again because u'll c the holes ive drilled for it to sit just wondering if ..

2010/02/08 16:24:51
premacist

What is the escort forum in UK

What is the ford escort forum in england ---thanks for any info..
1
2010/02/08 13:34:45
Sterling

where to buy locking fuel cap?

as said above, where do you buy replacements from? repco has been just useless, and none of the universal, off the shelf items fit. thanks guys! im counting my lucky stars everytime i fill up that they key will still work! half the key is IN the cap LOL..
9
2010/02/05 21:21:01
hak073

xflow oil filters

I've sent the wife to town today to get an oil filter for the 1300. Asked for a Z62 like I usually get, but she's come back with a Repco ROF-22, which apparently replaces the Z62. It looks a bit shorter than the Z62 too. I'm just wondering if its any good, or am I better off going and getting a Z..

2010/02/02 18:50:40
willy pete

Mk2 Panelvan Rear Shocks

Not really urgent, just a topic for Mk2 Panelvan enthusiasts. Well, I finally got around to rebuiding the rear end on my inherited 1976 Mk2 Van over the Christmas break. Part of the job was to install a new pair of Monroe rear shocks, Part Number 15-0066 which Monroe claim to suit 74 - 82 Vans..
6
2010/02/02 09:24:19

<< ..124 125 126 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account