Help... URGENT!

To Bottom

Help... URGENT! (p.123)
Post New Thread
Regular
Dave

URGENT!!!!!!!!!escort 9" brake drums

g'day guys this is semi urgent,after less than 500ks my new brake shoes have worn down to nothing on the left rear,and few quick checks reveal the left drum is bent and running out about 5mm which has been giving me braking dramas for abit thought I should look into it. so if any one has 1 or ..
7
2010/03/16 14:52:20
3sc0rt

Removing Steering rack

Im having a little trouble removing my steering rack so i can put my new 2.4 in.do you have to remove the oil filter to get to the top bolt on the rack mount? i am trying to avoid that if i can. The top bolts are unpleasant individuals to get to especially with those dam washers Cheers, Rhys..
24
2010/03/16 14:19:56
r_rodway1989

changing 1.3 cvh for a 1.3 crossflow

i have changed the engine of a mk2 fom a 1.3cvh to a 1.3 crossflow and the crossflow drive shaffts are too long wich drive shafts can i use???..
1
2010/03/16 14:15:46
hak073

mk1 Escort gear lever

Does anyone know off the top of their heads what the size and thread are on a Escort shifter? I'm away from my cars so can't get a measurement...
1
2010/03/15 19:36:17
gtv6capri

Altas diff axle from MK2 MK3 capri URGENT

Anyone got an Altas diff axle from MK2 MK3 capri?? Need one ASAP for a club member with a MK3 racer Ph JR 0409 091 252..

2010/03/14 19:45:27
digginganddirt

ford escort mk2 panel van value???

hi looking at buying a panel van, ill give you the run down on what it is and please tell me what you think its worth? 1.6 manual,white,very clean inside one crack in dash great drivers seat, one 5 cent bit of rust on the top of sill (wear the door rubber is) scraped passenger side gaurd, getting..
3
2010/03/14 15:12:20
spanner

MKI Corty adjustable TCA's

Probably been asked before, but where can I get some? I don't really want to drill new holes in the cross member. Thanks..

2010/03/11 13:38:31
ratta tat tat

Setting timing curves

I'm trying to get as much info as possible for setting the timing on my 711M crossflow with a DCOE weber and no vacuum advance with the standard motocraft distributor. I'm trying to find a kit with some different weights and springs to change the timing curve. It would be great if anyone can help me..

2010/03/11 00:50:05
esky79

new floor pans

hey every1 i need to source some new floor pans for a mk2 escort asap. does any1 kno were i can get them from? (apart from the uk) cheers..
5
2010/03/11 00:03:21
Sterling

intendifying pinto head

i just thought i would throw this out there, the head on my "good" pinto (currently in car) has larger intake valves, same exhaust valves, and the valve stem seal (retainers?) or whatever there called, (things that the valve stem seal slides onto, in the top of the head) are smaller ..
3
2010/03/09 19:25:33

<< ..121 122 123 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account