Help... URGENT!

To Bottom

Help... URGENT! (p.12)
Post New Thread
Regular
Flighter

Freight charges - Motomobil sets a new standard

Hi all, As many of us have experienced, freight from Europe is pretty high these days, but I think Motomobil has set the standard all the others are trying to reach. I have 47 grams (yes, grams, not kg) worth of parts to order (excluding any plastic wrapping), and the fee will be... wait for it... €..

2015/12/22 13:02:30
Cholaso

Wheel Hub Seal

Anyone know where i can find a new set of wheel hub seals for standard mk 2 escort 80 model. Mine are shot and destroyed bearings Thanks Rodney..
2
2015/12/03 12:04:06
Flighter

Mk2 Escort - axle offset?

I installed some fat new wheels and tyres this morning, and it looks like my axle is offset towards the driver's side. I checked that the tyre size and wheel offset are same on each side, yet one wheel pokes out a good 25mm more. The car has never been in a serious prang, so I'm assuming it came fro..
8
2015/11/29 18:42:47
gtv6capri

weber 32 36 DGV complete or parts wanted urgent

Hi all, I got a phone call from a lady with a 1 owner 1600GT capri, her carb is buggered as the screw holes in the main body are stripped beyond repair. This car is her daily driver and she is in country Victoria. I need a Manual choke weber to replace it, even just the main body housing ASAP, PM or..
5
2015/11/24 21:11:53
Paul Dunstan

Rust repair sections

Hi AllI'm desperately seeking a rust repair section for the RS. I'm after a complete "C" pillar for bot sides to graft in the damaged inner and outer rusted sections rather than stick a plate over the outside. I understand these sections are about screwed on every 2 dr shell but hoping for a miracle..
9
2015/11/23 20:11:01
Jason

Trouble fitting RX-7 Caliper conversion kit to GRP4 Capri struts

Hi,I'm trying to fit a pair of Paul Dunstan's RX-7 Caliper adapters to my GRP4 Capri coilover struts. No problem with the kit, it's great, but I need to test fit the calipers so I know how much to machine off the spacer kit in order to centre the discs in the calipers. (using alloy hubs, which The m..
17
2015/11/17 19:30:58
PeterM

Australian Mk2 RS2000 Factory Sunroof?

Hi All, Can anyone shed some light on what appears to be a Ford factory fitted sunroof to an RS2000? I am sure they were not regarded as normal dealer option for new vehicles. The sunroof is spot welded in place with the turret very neatly pressed and folded as per production expectations. The ..
16
2015/11/17 18:05:42
Paul Dunstan

Clutch pedal clevis

Hi all In recent times I purchased my M8 clevis' from Smacks but since he is no longer a retailer I'm having trouble finding a suitable item. I'm sure Smacka sourced his through Rally Design but due to my small order it's rather expensive. Anyone have a local supplier??..
6
2015/11/17 16:11:34
alang77

Melbourne show in February next year I'm coming over from UK n would like to join some guys from Sydney to go there I know Graeme knight so would like join that group because I'm staying there with daughter contact me on email if any can advise ar.goodai

Escort..
6
2015/11/15 21:11:20
gtv6capri

Reverse light switch plug needed

Hi all a club member has a 1600GT capri, he needs the plug connector fitting that goes into the reverse light swich, I assume it looks a bit like a press stud. Is there anywhere to get this fitting? Or is there a later switch with bullet/splade terminals?? Cheers JR..

2015/11/09 08:41:20

<< ..10 11 12 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account