Help... URGENT!

To Bottom

Help... URGENT! (p.104)
Post New Thread
Regular
Bloodyeck

ALL FORD DAY - Adelaide

If any of the organisers of the All Ford Day in Adelaide is a member of the forum could they please contact me. The Classic Ford Club of the NT is considering a similar event and some organizational hints would be appreciated...
1
2010/11/07 19:29:29
Scott

Comprehensive Insurance

I'm thinking of getting comprehensive insurance for the RS, and was wanting to know of peoples thoughts of different isurers, who to go and most importantly who to avoid. I've been thinking of going with AAMI and doing the 'Skilled Drivers Course' which will give me a discount with them until I'm 2..
23
2010/11/05 17:21:12
Sterling

sock filters for trumpets/ram tubes needed.

need some filters for my DHLA 40's either long element filters or sock filters anybody got any?..
32
2010/11/04 18:46:21
Sterling

2ltr engine fans same as 1600?

are 2ltr engine fans the same as 1600 fans?? thanks in advance..
4
2010/11/03 17:45:47
shoey

CAM identification - CWC Ep-26

Hello Was cleaning up the shed and found an old Pinto head that looks like it has been ported, and contains 44mm inlet and 38 exhaust values. It also has a cam that has the following markings: CWC EP-26 A28 1.5 0.2 That is all the markings I can find on the cam. Does anyone know the specs f..
1
2010/11/02 08:56:58
ratta tat tat

MK1 MK2 engine mounts

The mounts that were on my 1300 MK1 escort block were rectangular and were fixed to the crossmember by a bolt from behind. However the 1600 MK2 mounts have 10mm threaded rod fixed into them which protrudes about 30mm. I tried to subsitute one of my worn rectangular mounts for a round MK2 one but ..
6
2010/10/31 23:42:48
luigi

1970 escort twin cam

can someone give me some info on these numbers on shock towers drivers side has CK49j75005 and eg1104b and on passengers side 3512 stamped thanks LUIGI any more info..
2
2010/10/31 10:59:15
TEX

twin cam diff

Is there any thing special about the twin cam diff? I mean apart from larger brakes and the arm mounts? Reason I ask is I have another mk1 diff, and I strongly suspect the twin cam diff may be bent as it has very large piece of right angle steel welded to the top to 'strengthen' it, looks like a spe..
3
2010/10/27 13:45:08
ratta tat tat

cylinder head condition? pics inside

So I decided to get my 1600 ready for transplant today and saw this when I took off the inlet manifold. What would cause such a mess? When I removed the thermostat it looked a little rusty inside the head, but not too bad. I also removed the gunk from the head where the inlet manifold coolant passes..
7
2010/10/27 13:40:07
smallvan

Barn door rubbers

I just bought a kit of rare spares,and read the instructions.It tells me to look how the rubbers came of, the old doors before i put the new ones on. But the problem is, they never had rubbers on them.Anybody have a picture, or a diagram of them they could post up. Regards James..
6
2010/10/27 13:31:03

<< ..103 104 105 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account