Gearboxes and Differentials

To Bottom

Gearboxes and Differentials (p.16)
Post New Thread
Regular
bennymac24

Auto Trans options

Hi All, I have a 1980 mk2 panny van project i have just aquired and will be starting soon, it currently has what i think is a c3 but may be a bw35, now i know i'm going against the grain here but i'm pretty keen to keep it auto but i know they are pretty weak, has anyone fitted a c4 to a pinto befo..
3
2012/02/03 21:06:07
Flighter

New 4 Speed Gear Lever Recommendations

Hi, I'm interested in opinions for a replacement 4 speed gear lever to suit an Escort. I once had a reduced throw adapter on a standard lever, but it felt too notchy so I removed it. I accept that a reduced throw shifter is probably all I'll be able to get these days (unless somebody knows otherwise..
4
2012/01/23 20:26:29
Forte

T9 into Auto Mk 2 escort

G'day everyone, Sorry as this question has probably been smashed 1000 times but here goes... I'm fitting a T9 to my previously auto mk2, i'm using the auto crossmember so it will bolt straight up, do i need a spacer between the mounts and the cross member? and how think? about 20mm?? Also, how far b..

2012/01/10 14:02:31
Ionix

Ford Capri 5 Speed V Type 9

Guys, its been awhile! Just searching for ideas and clarification. If I can get my hands on a Capri V6 5 Speed Gear box, will i be able to make it work if i change it over to the type 9 input shaft as by looking at exploded view diagrams, the gearboxes appear to be the same length/internals/dimensi..
8
2012/01/03 16:49:50
mezza18

in need of new diff asap!!!!!

Gday guys, im really in need of a new diff, i have a 3.89 auto diff at the moment and its sounds like the centre bearings have **** themself! Im after a early hilux diff as ive been told there the easier upgrade and will have alot more room to modify the diff, would i be able to get like 3.45 or 3...
3
2011/12/30 19:39:45
Doron

Hi there

Hi there I need your advice. My car is a MK1 and I have a problem of oil leakage from cable connecting the dashboard speedometer I replaced the seal in the gear and still leaking. Do you have an idea?..
4
2011/12/22 20:30:01
75Van

Reverse Light Switch

Hi All, I'm finally getting around to fixing my lack of reverse lights, so I need some advice on the problem. The reverse switch that is in the gearbox only goes to ground when you hold the stick over to the passenger side of the car (when reverse is selected) - if you move it over to the right it..
5
2011/12/09 09:15:46
Dawleymon

Sierra 5 speed into mk1

High all got a 1600 to replace the wheezy 1300 to go in my mk1, and have 5 speed to go in it too. As the cars a manual will the 5 speed fit in the standard tunnel, dont really want to chop tunnel as its a tidy car ? Anyone done this conversion in standard tunnel?..
5
2011/11/28 13:27:59
sbclover

4 sp Gearbox parts?

Who is the best to deal with in regard to rebuild kits and spares for a 4 sp gearbox? Sean..
1
2011/11/13 09:14:00
ulsterman

ZETEC Engine and DELLOW SUPRA Bellhousing

Guys, just checking if anyone has used the Dellow Pinto Bellhousing with their Zetec to fit a Toyota Supra Gearbox conversion.?..
9
2011/10/17 20:23:54

<< ..16 17 18 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account