Gearboxes and Differentials

To Bottom

Gearboxes and Differentials (p.12)
Post New Thread
Regular
Matt75

3J Diff Video Ad

http://www.youtube.com/watch?feature=player_embedded&v=2pcICR3tUKE Cheers Matt..
2
2013/03/07 21:33:18
2002dag

Axle splines on Mk1 escort

I've got a Amaroo Clubman with a Mk1 escort diff in it. I want to fit a Quaife ATB diff but need to know if axles have 16 or 22 splines. Being basically a lazy bugger I don't want to pull car out of use to pull axles and check. Thought someone might know if this can be determined from the following..
4
2013/02/28 00:07:44
Suttonmotorsport

T9 & T5 measurements

Hi All, Could someone provided the following details. T9 front brg retainer housing diameter T9 input shaft lenght T5 front brg retainer housing diameter T5 input shaft length(ford gearbox) Thanks Craig..

2013/02/17 12:14:51
Dawleymon

Type 9 5speed to 1600 x-flow

Hi all Got 1600 x-flow to go in my mk1 (manual shell) but also have a sierra 5 speed to go in it Now I know i have to relocate gear shifter hole, and have been told standard speedo and clutch cable are fine. Has anyone else carried out this conversion, what else is required etc Is it worth the w..
3
2013/02/05 06:11:54
Robmk2

Diff throwing oil

Gday, Poked my head under the car for a look the other day and noticed a large amount of fluid looks to have been thrown from the diff around the drive shaft area, I haven't got a lot of experience with diffs so might ask you lot how I can fix this one... You'll see the fluid pretty noticeably on t..
3
2013/01/01 23:10:13
sacort

PLEASE help identify this diff

hi all, found this little gem in the rear of an old mk1 rally car, does anyone know where it's from?? many thanks Dave..
2
2012/12/30 12:40:36
ratta tat tat

Bellhousing thread size??

Hi, I need to helicoil a couple of threads in my bellhousing. 1975 escort 4 speed. Can someone please tell me the thread size so I know which kit to buy. Thanks..
1
2012/11/22 18:19:28
SaggaRS

MK2 Propshafts

I suspect my tailshaft is requiring attention as it has an annoying shudder / vibration when launching. I replaced it years ago with an item from a wrecker, when the CV failed. The centre wasn't servicable back then from memory. Question is I have what I think is a MK 1 single piece tailshaft lyi..
16
2012/11/11 12:44:28
The Other Half

Different Diff thread types. Metric/Imperial

Hey guys, I've got a Diff that had a 3.77 in it. I've been given some metric thread bolts for the R31 disc kit that bolt onto the flange however I've found they don't wind in. It appears they're a different thread. Were there different types of diffs, both metric and imperial in Oz? What's the threa..
1
2012/10/29 22:26:08
markone

New Shifter Required

I need to get a new shifter for my Mk1 escort. It is the original gearbox and I would like to get a (close as possible to) original unit. Can anyone help with information on this. Cheers...

2012/10/25 17:40:08

<< ..10 11 12 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account