Exhausts

To Bottom

Exhausts (p.2)
Post New Thread
Regular
Stuart

Rapid Exhausts. Fairy Meadow.

Chatted to them last year and they can remake Bob Holden Escort extractors. Ive had a set on my RS2000 for many years without any problems and if I need another set Ill be calling Rapid again. Call them for price, but I think they said about $300...

2014/01/28 14:17:39
the_cheese

Pinto on bike carbs - which Pacemaker extractors?

Hey guys, I've bought myself a Pinto engine from Scotland and I am eager to fit it to my mk2 escort when it arrives! Crazy you say, but as the engine came with bike carbs, starter, alternator, elec dizzy and a type 9, it was a no brainer upgrade from the ol 1600 kent! Just bout the only thing I will..
12
2013/11/22 10:20:07
ratta tat tat

Muffler advice

Hi, I'm a bit unsure about the system that's in my car at present. Mild pinto into 4-2-1 extractors, 2" outlet, 2" system with triflow muffler before the diff. A guy I've dealt with at the muffler shop advised against anything bigger than 2 1/4 because I'll lose back pressure. He made a HUGE point a..
16
2013/03/20 20:44:34
BootOn

Manifold Goo

Hi I'm using an original cast 1600 manifold on a standard head and keep blowing the gaskets out. I've tried no sealant, tried red sealant and it keeps leaking. Is there a foolproof goo and gasket combination that will fix this up? I never had this problem with extractors and thought the stock man..
3
2013/02/26 21:13:03
BootOn

Xflow extractors

Hi I'm wondering if someone can point me in the right direction. I'm looking for a decent set of extractors for a mildly tuned xflow in a mk2 escort. Currently I have a set of Ashley 4-2-1 but they don't fit very well and have cracked through on cylinder 4 primary. Would prefer a local supplier, any..
1
2012/12/18 13:04:45
yan_83

Escort Pinto 2 Litre Exhaust Advice

Hi Guys, Just after some advice for my 2 Litre Pinto running Hi-Tech Extractors, diameter is 2 1/4 inch. Was wondering what you guys would recommend going straight through with 2 1/4 inch tip or should i put a "hot dog" on the end? Regards Yan_83..
3
2012/10/13 17:01:58
escortinadriver

Wideband air fuel meter

Has anyone had any experiences with these in kit form? Looking at getting something like the innovate kit with the tunning software package. Experiences alternatives? Just after a bit more info for some self tunning feedback/data. Thanks, Shaun...
8
2012/07/25 16:24:24
Suttonmotorsport

MASS style exhust

Has anyone got a pdf or similar for a MASS style exhuast manifold for a crossflow? I would like to build a set. Thanks Craig..

2012/05/26 16:54:09
Matt75

Interesting Exhaust Design with exhaust evacuation/booster

Hi Guys, I have been in contact with Dave Carpenter in the USA who races Pro 4 Series speedway car powered by a 2.0 Pinto making around 230 odd hp. (http://www.secordmotorsports.com/) to pick his brain on a few things and he sent me a few pics on this exhaust system he is playing around with. To Quo..

2012/05/22 11:31:25
MATTJ

2.5" or 2.25" exhaust for 2.1 Rally pinto

Hi all At a rally on the weekend my exhaust was smashed to bits by rocks and what not so i need a new exhaust from the extractors (handmade 4 into 1 collector), i currently have a 2.25" one that turns 90 degrees under the gearbox and goes over the diff to a straight through oval muffler at the rear...
1
2012/05/21 12:24:59

1 2 3 - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account