Engines - CONVERSIONS

To Bottom

Engines - CONVERSIONS (p.6)
Post New Thread
Regular
mk1escort73

ca18det into mk1 escort

Im lookin to build a motor for my mk1 escort, 1973 four door,was a 1300 auto i have converted it to 1600 manual,i have been lookin at a pinto for my build but i will not get the go im after out of one unless i turbo it, im after about 135rwkw to 150rwkw,heres where im after some advice,is turbo char..

2010/09/18 17:16:35
ecybom

mx5 b6 question

hi everyone,im pretty new to this site and cant tell you how handy it is. i have 3 mk2 Escorts and am looking to do my first engine conversion...and have a plan of "twin cam, twin carbs". after doing alot of research it think a mx5 b6 on twin 40mm dellortos (i already have the carbs) would..
1
2010/08/31 23:36:27
mk1escort73

1.8 bp tx3 laser engine

anybody converted 1.8 16v twin cam from a fwd 1994 tx3 laser into a mk1 escort? any advice appreciated....
18
2010/08/11 15:55:48
T_Mark

Mazda 2.3 Turbo And MX5 Duratec Info

Hi, As iv'e been researching engines for my mk2 project im just wondering if anyone can help with info. The 2.0l Duratec comes in both the newer ford focus and mazda 3 and 6?? Im still not too sure! Anyway ive found a wrecked mazda 6 mps 2007 model with the 2.3 DISI Turbo engine and manual 6 speed b..
30
2010/07/02 09:44:52
xpackken

CA18DET Into mk2 escy , uk member needs help ,

greetings from the uk guys , i have been pointed in this direction from a member of oldskoolford.co.uk forum , i am so pleased to find alot of you guys have been putting sr/ca engines in your Escorts so you all know your stuff THE PLAN = MK2 ESCORT + CA18DET MANUAL BOX i am abit of a when it co..
1
2010/06/23 16:21:13
Brett

SR20DET S14 into a mk1 escort

Thought I might share some photos of my new engine mounts, fitting an S14 SR20DET in to a mk1 escort. They looked impossible to do in the start, but about 2 and a half days later the engine is hanging happy as can be. I used 6mm steel, a bit of overkill, but very strong. They will probably out la..
7
2010/06/09 20:13:01
redders

Perth fabricator for inlet ducting tubes

anyone know of a handy steel fabricator to assist in the making of some fine air induction tubing from turbo to AFM and intercooler to Turbo?..
5
2010/04/04 14:17:22
ratta tat tat

COST!!!

The biggest question of all. Project being a NA MK1 escort I'll put a couple of figures in, what I'm willing to spend on the engine & transmission and a few others. From previous experience I'd like some forum members to copy paste these items as well as some I may have missed and put approximates ..
4
2010/03/28 21:25:57
99vctfairlane

sr20 det in mk 2 coupe...

Hey guys, got a '76 mk2 coupe and looking and either 13b single turbo or sr20 det.... i'm leaning toward the sr among other reasons but also because a good friend of mine is selling a rebuilt one quite cheap. With no box but everything else need for the engine. Issue i have is its from a GTiR and..
3
2010/03/23 19:46:13
3sc0rt

Volvo B230FT, SR20DET, Ca18 or FJ20

Hey guys, ive been trying to figure out what will be the easiest and the most cost effective way to get some good power, i know alot of people go the SR20 but its still a bit expensinve, just want to know some people insights on what they think each avenue will cost and how hard it is. i dont really..
24
2010/03/21 00:11:40

<< ..4 5 6 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account