Electrical / Ignition / Cooling

To Bottom

Electrical / Ignition / Cooling (p.14)
Post New Thread
Regular
2lt_Scort

2lt Turbo radiator upgrade

G'Day, I'm currently stuck on my track car project as I'm ready to paint engine bay but have had second thoughts about using a 3core Escort radiator and cutting the front out some more for a much bigger and hopefully more efficient radiator. I after guidance on surface area vs thickness. Escort rad ..
3
2013/03/17 08:23:56
Suttonmotorsport

Delco 808 ecu

Has anyone used a JE Camira delco 808 ecu to run EFI using deloc hack? If so could u provide some details on how u did it? How did u remove the original program? How did u install the new program? Tuning,sensors etc etc etc Thanks Craig..
1
2013/03/16 19:42:02
Dawleymon

Cable to battery +

Hi All Relocating the battery to the boot in my mk1, x-flow standard car My question is what cable grade / type do i need for the positive cable where is the best place to get this from? Also what the type of battery ie how many amps etc rather have it heavy duty...
11
2013/03/16 09:40:10
Suttonmotorsport

Motorbike ECM

Hi all, Has anyone considered using a complete efi system off a late model bike? I.E throttle bodies, ecm, wiring looms, coil packs, sensors etc Maybe a cost effective solution for fuel injection. I am considering using one to fuel an engine with about 150hp. For example a 2002 Yamaha R1 produc..
4
2013/03/06 12:50:28
Matt75

FIA Kill Switch & Starter Button

Hi Guys, I am installing a FIA KIlls Swict and thought i'd remove the key ignition too as mine is on it's way out. I will have the Kill switch, an accessory switch and a seperate one for the fuel pump. Here is the instruction sheet for the kill switch Can anyone shed some light as to which wires are..
8
2013/02/18 15:01:27
Matt75

Info Request : Blanking off Dizzy

Hi Guys, I want to get a EMS system for my MK2 Pinto (possibly Nodiz Pro or Mega Jolt etc..) and was just wondering what people do with the dizzy? Obviously half of it needs to remain as it drives the oil pump but is there a plug you can buy off the shelf or do you need to machine down the dizzy as ..
2
2013/01/30 16:34:06
Dawleymon

Tacho wiring ??

Hi all Picked up a old school tacho today, only thing is no wiring diagram. Got the following coloured wires: Red (presume + coil) Black (presume earth) Green (no idea) White (no idea) one wire must be to light also Anyone got any ideas or how to find out which is which without blowing it up!..
2
2013/01/28 06:21:48
wade

electronic dizzy

has anybody tried the powerspark dizzys off ebayuk? just want some feedback before i jump in and buy one. thanks..
3
2013/01/08 09:43:38
esky79

Brand new genuine tail lights?

Hey there Can any 1 point me in the direction of brand new genuine mk2 escort taillights? If there still available... I bought brand new tailights off ebay and there ****... The housing doesnt pull into the body properly even with using a heat gun on the rubbers its as though the plastic mould is ..
2
2012/11/29 12:26:23
35QRT

12 Circuit

Ok guys maybe a silly question but is a Mk II 1600 standard wiring harness 12 circuit? Cheers jared..

2012/11/26 10:46:15

<< ..13 14 15 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account