Induction (Carburettors / Fuel Injection)

To Bottom

Induction (Carburettors / Fuel Injection) (p.9)
Post New Thread
Regular
Matt75

Moving fuel tank into the boot on a MKII

Hi Guys, Are there are benefits to moving the tank into the boot on a MKII? I am building my car for track racing and have seen guys use Capri, Datto or Gemini fuel tanks in the boot. From the design it seems they may be better for fuel surge but I plan to use a swirl pot anyway. Another question is..
14
2012/08/18 17:03:04
ratta tat tat

Spanish Webers??

Hey all. I just want the low down on Spanish webers. I'm looking at a pair of 40DCOE151's for my escort. They are well priced but I'm not sure about the pro and cons, not being italian etc. Thanks..
3
2012/08/07 12:20:13
SaggaRS

Pro Zone Filter.

Anyone used a ProZone fuel saver inline filter for the purpose of lead replacement in unleaded fuel? Thoughts??..

2012/07/23 17:24:19
davidnapier

Twin Carbs vs Brake Booster

I am looking at fitting a HiFlow 75mm twin carb manifold to my 1600xflow in my Mk1. The car currently has a non-boostered master cylinder attached directly to the firewall, but I have a boostered master cylinder on the standard brake extension bracket. The manifold seems to have a 30-35mm upward of..
3
2012/07/23 17:11:24
razzle308

fuel pressure reg needed??

I have a bosch type elec fuel pump. does 330lph. I am going to be running the fuel past the twins and back to tank through the return line. The return line is a slightly smaller dia which will create a little pressure to the carbs. (this is how i understand it). So do i need to run a fuel pressure r..
11
2012/07/18 18:10:55
Matt75

R1 Bike Carb Set up Questions

Hi Guys, Having a few issues getting the carbs to run smoothly. I can get it to run but I still get fuel leaking out of the overflow tubes and from around the float bowl chambers. I have increased the float heights to around 9mm and was wondering if this would cause the leaking? It may also be my fu..
4
2012/07/07 17:15:37
356mal

32/36 weber

is the 32/36 carby from a 1600cc escort ghia / gt the same as a 32/36 from a 2ltr cortina / escort ? apart from the manual /water / electric choke thanks mal..
2
2012/07/06 19:23:20
Suttonmotorsport

Webers vs Dellorto's

This topic may have been covered before, but I thought I would open a pandora's box. What is the general view of Weber's vs Dellorto's? Pro's & con's of both? Can't run injection in the class I will be racing in ( just to cover that suggestion). Thanks Craig..
6
2012/07/06 15:30:08
karlyoung

Custom manifold

Anyone know where I can get a custom manifold made up for bike throttle bodies to pinto, in the Perth area? Cheers Karl..
5
2012/07/05 14:23:05
75Van

Name that carb!

Hi, A mate has this carb laying around, and I'm welcome to it if it'll suit my 1600 crossflow. I thought it looked like a Weber 32/36, but it clearly as Holley cast in to it. http://i270.photobucket.com/albums/jj91/monkeysxr6/Image237.jpghttp://i270.photobucket.com/albums/jj91/monkeysxr6/Image238...
7
2012/06/01 10:53:30

<< ..7 8 9 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account