Induction (Carburettors / Fuel Injection)

To Bottom

Induction (Carburettors / Fuel Injection) (p.5)
Post New Thread
Regular
ratta tat tat

DCOE jetting for Kent 1600

Hey fellas, Can someone please offer me some advice for re jetting my single DCOE 40 weber? I have it on a standard low compression 711M motor and it runs great. Specs are 65 starter, 35 pump, 45F9 idle, 40ex, 200 air, 130 main, 32 choke. Now I want to put a different engine in the escort. High co..
16
2014/11/30 13:29:12
Akeeg

Mark 2 69 litre plastic tank.

Hi, I'm looking for a mk2 69 litre plastic tank. I know they're very rare, but if anyone knows someone that might be persuaded to part with one, that would be great! I'm looking on ebay and have contacts overseas looking too! Also after a group1 dipstick. Thanks..
2
2014/11/19 17:07:07
Drewdog

Mk2 Fuel tank advice

Hello all,Couple of questions in regard to my mk2 droptank.Does anyone know where to get or have a part number for the sender seal?...I'm about to paint mine up and want to give it a clean out, it's been dry for a while now and doesn't smell at all anymore, I could here debris rattling around but go..
3
2014/11/09 19:29:33
ratta tat tat

32/36DGAV Jet holder thread size?

I need helicoil kit for my carb body, repairing the thread for Primary Idle jet holder. Is this 1/4" UNC?? Thanks..
4
2014/08/10 16:48:48
Chuff

Throttle cable for EFI Pinto in Mk1 Escort

Hey all, Putting together the parts I need to EFI my Mk1 Escort and need a throttle cable. I've just purchased the factory Pinto EFI manifold listed below and am wondering what cable are people using for this setup? http://www.ebay.com.au/itm/261542475471?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m..
3
2014/08/07 08:59:16
smallvan

Cold Airbox

Has anybody made a cold airbox for their escort,if you hhave where did you draw the air from.???..
18
2014/07/13 21:52:06
krt10

Weber DCOE issue

Hello guys, I have a problem. my xflow has twin 45 dcoe. i did a track day on the weekend. its the first time ive been able to run the engine in anger. i found that at approx 5500rpm the engine had a misfire. one of the carbys had alot of black "soot" around it and when i got home i pulled the carbs..
3
2014/05/25 04:40:48
Matt75

Cleaning Carbs

Hi Guys, I am rebuilding a set of twin Dellorto 48's and as they have been sitting around for a while there is a whiteish deposit inside that I want to clean up. It seems like it's a calcium deposit or something similar and running with a brush doesn't seem to lift it. Will Carby Cleaner sort this o..
3
2014/05/03 13:40:57
richo17

jet settings 40mm DHLA dellorto's pinto

anyone running 40mm dhla dell's on a 2 litre pinto with mild headwork, standard valves, mild cam, 40 thou overbore high compression? need some base jet settings to get me going, anyone know at all?..
3
2014/05/01 18:23:59
wade

32/36 mixture screw

Is the fuel/air mixture screw supposed to have a spring? When I look at exploded view of the carby it has a spring but mine doesn't... It's a screw with a point and an o ring near the head of the screw and when I go to adjust the mixture nothing happens at idle It's not blocked I have pu..

2014/03/30 20:20:01

<< ..4 5 6 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account