Induction (Carburettors / Fuel Injection)

To Bottom

Induction (Carburettors / Fuel Injection) (p.4)
Post New Thread
Regular
ausmk2

Alloy Fuel tanks

Just a question everybody,what are the legal issues regarding replacing the standard Fuel tank with a new alloy tank, I am wanting this setup in my Mk2. Cheers..
5
2015/06/12 14:43:45
NQRS

Fuel drain from carbies.

Hi All,Have become a bit pissed off with fuel from my twin 45's draining back to tank. Wasn't much of an issue at first but car is driven a lot more and I hate having to wait for electric pump to push up juice again. Have seen alloy one-way check valves on line- do others use them? Also see a few of..
3
2015/06/07 20:31:34
ratta tat tat

Is this rough?

I found a problem when using K&N style filters with DCOE's when the insert type ram tubes are used.The thickness of the back plate on the filters coupled with the gasket create a gap, so the locking tabs don't do their job (the ram tubes have movement)To solve the problem I stripped some copper ..
4
2015/06/04 17:42:47
2lt_Scort

Fuel rail to suit 2lt port spacings - OEM from another make of car?

I need to chose an inlet route on an EFI Escort, the setup I'd like to use runs a standard carby manifold with injector bungs but doesn't currently have a fuel rail. The plan is to not use a Sierra EFI manifold if I can help it. I see my options as: I can attempt to make my selfPay to have one madeU..
16
2015/06/03 18:47:42
luke rettke

Pedal Box Throttle issue

Having an issue with the custom pedal box throttle on the car. There is what feels like 2cms of foot travel between full throttle and idle. In the photo shows the lowest i can get the cable with out having to modify and cut the pedal to get it closer to the swivel point. Has anyone whos installed a ..
5
2015/05/10 19:50:52
smallvan

Running LPG on a import motor

Running LPG on a import motor, As stated i'm thinking of putting my escort on LPG with a jap import rb20 det. What do i need in the old girl.A cat?,lube kit...
2
2015/05/03 09:22:59
ITFKSU

EFI Pinto

Hi Guys , does anyone here own a street registered efi escort that has gone through engineering? I'm wondering what are the hoops ill have to jump through in order to legally run the car on EFI. What have some of you had to do to get a roadworthy certificate with this set up? Thanks Ez..
4
2015/05/02 23:20:05
mk1escort73

twin webbers on 1600

Is there a certian manifold to run twin webbers on 1600 to clear standard brake booster or not? Cheers..
3
2015/04/25 14:26:03
mud

FAJS DCOE copies. Anyone using them??

Just wondered if anyone is using the reproduction DCOE's from PROCARB etc on ebay?Cheers,Cam..
2
2015/04/17 19:32:55
Drewdog

MK2 Escort droptank sender seal

Hello all, having problems finding a fuel sender seal for a mk2 drop tank, however I've found them for the side fill tank...Does anyone know if they're the same? Or can anyone give me a diameter measurement of the sealing surface for the mk2 sidefill sender? Cheers Drew.......
9
2014/12/28 02:50:44

<< ..4 5 6 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account