Induction (Carburettors / Fuel Injection)

To Bottom

Induction (Carburettors / Fuel Injection) (p.16)
Post New Thread
Regular
JamesR

40mm weber or dellorto

ok so im looking into side drafts, nothing crazy, just twin 40s. stock bottom end, with a mild head so what's better? webers or dellortos? seems to be plenty of both on ebay, all around similar price. and both use the same manifolds/soft mounts. but what about linkages? how hard are they to come..
13
2010/03/03 10:26:11
2lt_Scort

Thoughts on std 2lt airfilter flow performance

Has anyone ever bothered to do research on the flow characteristics of using a standard plastic airfilter on a 2lt? Say in comparison to the Ramflo type element? What about little cutouts underneath on outside of filter section (so air still has to pass through filter)? Would this improve things..
3
2010/02/18 14:13:14
capri69gt

Lock Dizzy for injection/programed ignition

Hello peoples I have a point to clarify, I have an Essex V6 that I wish to use a MSD6AL-2 Programable on for ignition control. As the MSD will now control up too 32 load points, the stock factory vacuum and mechanical advance needs to be locked up. I assume that the dizzy should be locked in full..

2010/02/11 20:31:58
Sterling

running a PCV system /catch can on twin 40's

what setups are being used for twin carbies on a 2ltr? as for connecting the PCV hose to the manifold. could it just individually plumb them to each port as theres already two fittings for the brake booster, could i connect those 2 together? just wondering if theres a way out of not using a oil catc..
6
2010/02/03 21:16:59
Dawleymon

Manual choke conv 2ltr

Hi all Anyone know if you can buy a new manual choke conversion for my pinto with twin choke webber?..
1
2010/01/31 21:18:53
teeg

38 DGMS

G'day Guy's, I did have a 38 DGAS for a while which I intended to rebuild and put on the car and never got round to it and I flogged it and sort of regretted it since. Not long after, I got a bonus from work so I brought a new one from the UK, no bad, just over $400 landed and I was able to get a..
7
2010/01/12 09:52:34
Avon

Handy DCOE / DHLA jetting program

Found this on some Alfa forum. Very nifty for arriving at a baseline setup. http://www.teglerizer.com/ftp_root/jetting.exe Can't upload .exe file so might try zipping it if thats ok with admins?..

2010/01/05 23:41:53

<< ..16 - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account