Induction (Carburettors / Fuel Injection)

To Bottom

Induction (Carburettors / Fuel Injection) (p.11)
Post New Thread
Regular
ratta tat tat

32/36 on GT manifold VS single 40DCOE on Lynx manifold

Hi, Which of the two above will give better outright performance? thanks..
9
2012/01/27 22:34:37
svenoeger

Pinto 38/38 tuning

hey guys, Needs some tips on tuning the 38 weber on my 2lt pinto (big valve head etc)... do you keep the same original jets (155's). how many turns for the idle mixtures and jets... Already seems to be a big improvement in the 32/36.... just needs some fine adjustments. Cheers All. A..
2
2012/01/24 09:24:35
smallvan

Jetting for a 32/36 weber on a escort 1600.

I found this on the net its for a corty 1600,but it should work for a esky 1600. As mine is drowning when you try to give it throttle Venturi Diameter 26 /27 Auxiliary Venturi diameter 4.5/ .4.5 Main Jet 140/ 155 Air Correction Jet 230/ 180 Emulsion Tube Jet F 30/ F 30 Slow running petrol jet 50/ 70..

2011/12/29 16:19:11
shannon

injectors

would anyone know the flow rate or a part numver of the standard 2l sierra efi injectors as i gave mine away and not knowing a part number to find a flow rate thanx shannon..
2
2011/11/15 07:45:12
svenoeger

Twin Weber on Pinto LINKAGE SETUP

Hey everyone, Just wondering what linkages people are recommending for use on redline manifold holding twin 45's. Engine is a pinto with standard rocker cover. Not sure whether to get the unit that mounts on the top with the two lines, go the rose joints and arms, link the two together from the ce..
1
2011/11/05 09:33:15
spigot

32/36 jets

Has anyone here actually played around with a 32/36 dgv? My initial impression is that the idle jet is a touch on the small side but both main jets are noticeably on the big side. I stuck the sniffer up the tail pipe and I am getting AFR's in the 11-13 range???? Engine is only slightly warmed ove..
9
2011/10/24 21:00:04
pottergt

RS factory exhaust manifold

Hi Guys A while ago I purchased a heap of spares , a part of the deal was an original RS exhaust manifold and pipework ( same length as extractors ), it has the RS logo etc Just wondering if anyone has a rough value on these things , I am hoping $300 up . I have listed it on E Bay as I will never ge..
3
2011/09/05 22:24:50
smallvan

Ford KA injection

I was at my mates yesterday, he owns a car yard and he said look at the KA motor i have sitting there. So i opened the bonnet and their was a Kent motor,in another form. So my question is will the injection fit the old style Kent motor. Regards James..

2011/08/04 16:22:00
Cholaso

Bad Smell

Guys, I have toyed and toyed with different jets for a while now and still find that I walk out of my car smelling like unburnt fuel. Is it possible that large jest can produce this issue. At present i have 132 and 135 on. Are these still too large. The engine has a mild cam on it only. SOmeone ..
9
2011/07/16 19:19:28
smallvan

Vac lines

I'm putting a weber on the 1.6, and cannot work out where the vac lines go.Any ideas guys,as there is only one outlet on the carb and i have three lines to run OPPPS wrong picture This is the one that i should have posted http://i330.photobucket.com/albums/l420/brooksi59/003-8.jpg..
1
2011/07/14 14:10:21

<< ..10 11 12 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account