Body Shell / Paint / Panel

To Bottom

Body Shell / Paint / Panel (p.29)
Post New Thread
Regular
AndrewMk1

Steel Bubble Arches

Hey Guys so i got some steel bubble arches for my mk1, anyone in Adelaide installed these or know of someone that does. Any good panel beaters that specialise in Escorts in Adelaide that you know of? Thanks Andrew..
1
2010/05/02 12:50:51
JordyCharlieBoz

Custom side skirts

How do you think would be the best way to make some custom side skirts to run between the front and rear forest flare on my 4door. I was thinking that I could make it out of cardboard and when happy with it remove it from the car cover it in plastic wrap, and in fiberglass mat. Paint it in resin and..
3
2010/04/28 21:02:01
cjdeane10

round headlights

quick question - what do i need to convert a square headlight MK2 to a round headlight MK2 grill? Obviously i need the headlights and grill - but do i need the surrounds aswell, or will the round ones bolt into the square holes ? (pun intended)..
1
2010/04/24 00:46:41
muzza

Removing surface rust

Hi All! Hoping someone can give me some advice on the best way of preping an old Mk1 bonnet with surface rust before I paint it and fit it. Should I simply just sand it off or is there a better chemical way to prep it. There are small amounts in places I can't get to also. Also a good primer to use?..
15
2010/04/21 22:25:15
ratta tat tat

heater bubble rust prevention?

As a quick-fix I'm wanting to know if you can just pull the hose from the heater bubble and pour in some fish oil to prevent any further corrosion? Will it smell inside the cabin?..
3
2010/04/21 22:01:59
noexit

Pinstripes

Hi Guys, Does anybody know the width (small stripe & large stripe) of the pinstripping that the English RS2000 had. as per photo. Thanks Neil http://classic-ford.org/forum/uploaded/noexit/201024141235_escort_2.jpg..
2
2010/04/02 22:02:50
JordyCharlieBoz

Forest arches

Has anyone here fitted fiberglass arches to there Mk2? Reason i ask is i have gone to try and put my front ones on and i just cant seem to get them to line up properly. I'll put pics up later to show you'll what i mean. Oh and do you guys know anyone that, if i pay em enough money lol, would ..
25
2010/04/01 22:35:46
redders

very nearly there! rs2000 paint advice...

righto, nearly ready for paint on the old modified weapon. currently cream or old english white or what ever it was. what is the verdict on paint colours / schemes. keep it simple with one colour? go full mental paint scheme. jet black with graphite grey rs200 decals? what is your ..
12
2010/03/29 18:55:50
MK1_Oz

Hadrian Spare Wheel Well Panels

Anybody used the above? Comments on their fit? I found the inner panel great but the outer panel was bloody terrible. The rear of the panel sits at least an inch from the rear quarter!! Useless rubbish...... (maybe I should not have written this whilst still frustrated )..
1
2010/03/25 00:58:36
lucas

sand blasting

i am thinkin of buying a sand blaster one of the ones of ebay. there a small unit i figured this would be a good unit for doing the under body. and also car parts. Opinions bad? good? If you go on turbo sport all the blokes on there do it so cant be to hard, or can be and also im wanting to ei..
24
2010/03/23 00:19:17

<< ..28 29 30 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account