Suspension

To Bottom

Suspension (p.4)
Post New Thread
Regular
Ionix

How much camber??

Hi all Just trying to work out how much camber and caster I should be running as a good starting point before getting a steering alignment. I have the adjustable tops and adjustable lower tca but it's definitely too aggressive a stance at the moment. Any good tricks for measuring?..
5
2016/04/29 08:41:44
Drewdog

Gaz strut top options

G'day all,Looking for strut top options for use with a set of Gaz gold's. Using the solid top/ rose joint type at the moment but they seem very harsh on the road and give the odd knock over bigger bumps. Is there a rubber type mount you can use with these? or would a lower spring rate help? (current..
7
2016/04/26 21:07:47
Green machine

Advice on lowering mk2 van

Hi,Going to lower 2 inches my 1976 1.6 Escort mk2 van have blocks and springs what else should I change/replace at the same time. Anyone got any advice or bits they might want to sell? It will be just a daily driver.Thanks,Greg P..
5
2016/04/26 20:13:11
rallyrs

Wtb escort mk2 2l Rhs strut

Just had the stub axle shear off my strut at state khanacross. Could have been worse as pulled up and no other damage. Chasing a 2L Mk2 RHS strut or the pair if you don't want to seperate. Don't need Spring, strut top or shock insert as can reuse my own...
6
2016/03/26 18:53:50
BUZ440

Escort tie rod ends

Does anyone know the thread for the above? Looking for shorter thread tie rod ends for escort rack arms..
3
2016/01/05 23:07:43
mk1escort73

rose jointed mk2 strut tops

Looking at getting a pair of rose jointed strut tops from burtons, it advises after 77 inner wing modification need can anyone help me out with this?? Its a 80 mk2 escort cheers brad..
5
2015/12/28 00:35:38
mvscon

Leaf Spring Bushes Escort

HiI started replacing the bushes to the leaf springs on my mk1 escort(has 50mm springs)with Whiteline brand and and have come across a couple of problems.The rear spring eye set does not come with a metal tube which leaves the bolt too loose.The front set has a tube but is fractionally too tight for..
4
2015/12/13 22:19:14
the_cheese

mk2 strut tops

Hi guys, as some of you know I rebuilt my front end suspension recently. I did not replace the strut tops and it looks like they are actually cactus. SO im looking for a new strut top solution. At the moment I'm trying to work out if I've got small or large strut top mounts. I've taken these measure..
11
2015/11/30 09:58:23
Pipdog

Rack and Pinion

I am confused!!. I am new to Escorts, and bought a rack and pinion unit that needs attention, but parts from another rack do not fit. (The rack was dismantled from what looked like an Escort.)The rack body has casting ID 72012 with CC2 underneath, and is stamped 2L16ER3/34.It has 5 pinion teeth maki..
11
2015/11/17 01:14:40
retro666

Crossmembers?

Is there a difference between a Mk1 and Mk2 front crossmembers?..
3
2015/11/16 06:53:14

<< ..4 5 6 .. - Powered by APG vNext Trial

© 2025 APG vNext Trial Version 5.1

Use My Existing Forum Account

Username: Password: Verification:

Use My Social Media Account